Cisco ASR 14000 Series Management Command Reference page 463

Object Tracking Commands in Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear interface (track)
To clear entry of a particular interface object from a line protocol tracking configuration, use the clear
interface command in line protocol tracking configuration mode.
Syntax Description
type
instance-id
Defaults No default behavior or values
Command Modes Line protocol tracking configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The clear interface command is accessed through line protocol tracking configuration submode.
Task ID Task ID
sysmgr
Examples
The following example shows the use of the clear interface command:
RP/0/RP0/CPU0:router# configuration
RP/0/RP0/CPU0:router(config)# track name1
RP/0/RP0/CPU0:router(config-track)# type line-protocol state
RP/0/RP0/CPU0:router(config-track-line-prot)# clear interface atm 0/2/0/0.1
RP/0/RP0/CPU0:router(config-track-line-prot)#
OL-17231-01
clear interface {type instance-id}
Interface type. For more information, use the question mark (?) online help
function.
Identifies a physical interface or a virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Use the show interfaces command to see a list of all possible
interfaces currently configured on the router.
Cisco ASR 14000 Series Router System Management Command Reference
clear interface (track)
SMR-461