Cisco ASR 14000 Series Management Command Reference page 627

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server target list
To create an Simple Network Management Protocol (SNMP) target list, use the snmp-server target list
command in global configuration mode. To remove a target list, use the no form of this command.
Syntax Description
target-list
vrf vrf-name
host hostname
Defaults
No default behavior or values
Command Modes
Global configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use this command to create an SNMP target list and assign hosts to the list. When a target list is mapped
to a community name using the
the hosts in the target list (for that community name).
Task ID Task ID
snmp
Examples
The following example, a new target list "sample3" is created, and assigned to the vrf server "server2":
RP/0/RP0/CPU0:Router(config)# snmp-server target list sample3 vrf server2
Related Commands Command
snmp-server
community-map
OL-17231-01
snmp-server target list target-list {vrf vrf-name | host hostname}
no snmp-server target list target-list
Name of the target list.
Specifies the name of the VRF hosts included in the target list.
Assigns a hostname to the target list. The hostname variable is a name or
IPv4 address.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Associates an SNMP community with an SNMP context, security name, or
a target list.
snmp-server community-map
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server target list
command, SNMP access is restricted to
SMR-625