Cisco ASR 14000 Series Management Command Reference page 312

show platform
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
0/6/5
0/RP0/CPU0
0/RP1/CPU0
The following is sample output for the show platform command with the node-id argument:
RP/0/RP0/CPU0:router# show platform 0/1/0
Node
-----------------------------------------------------------------------------
0/1/0
Table 40
Table 40
Field
Node
Type
PLIM
State
Config State
1. physical layer interface module
Related Commands Command
show environment
Cisco ASR 14000 Series Router System Management Command Reference
SMR-310
Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
MSC(SPA)
RP(Active)
RP(Standby)
Type
MSC(SPA)
describes the significant fields shown in the display.
show platform Field Descriptions
Description
Identifies the node, in the rack/slot/module format.
Type of node.
Type of PLIM
Current state of the specified node.
Current status of the specified node.
Description
Displays environmental monitor parameters for the system.
8X1GE OK
N/A IOS XR RUN
N/A IOS XR RUN
PLIM State
4XOC3-POS OK
1
currently supported on the module.
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
Config State
PWR,NSHUT,MON
OL-17231-01