Page 1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide July 25, 2012 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-16506-11...
Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Page 3: Table Of Contents
Accessing the CLI Using a Router Console Accessing the CLI Using a Directly-Connected Console Connecting to the Console Port Using the Console Interface Accessing the CLI from a Remote Console Using Telnet Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 4 Console Port, Telnet, and SSH Handling Console Port Overview for the Cisco ASR 1000 Series Routers Console Port Handling Overview Telnet and SSH Overview for the Cisco ASR 1000 Series Routers Persistent Telnet and Persistent SSH Overview Configuring a Console Port Transport Map...
Page 5 Contents Running the Cisco ASR 1000 Series Routers Using Individual and Optional SubPackages: An Overview Running the Cisco ASR 1000 Series Routers Using a Consolidated Package: An Overview Running the Cisco ASR 1000 Series Routers: A Summary Software File Management Using Command Sets...
Page 6 Using ISSU to Upgrade SubPackages (Prior to Cisco IOS XE Release 2.1.2) Upgrade Process With Service Impact for Nonredundant Platforms Configuring SSO on a Cisco ASR 1001, Cisco ASR 1002, or Cisco ASR 1004 Router Using SubPackages for Software Upgrade on a Cisco ASR 1001 Router...
Page 7 PPP Sessions and L2TP Tunnel Scaling Restrictions for PPP Sessions and L2TP Tunnel Scaling IP Sessions Scaling Layer 4 Redirect Scaling Configuring the Cisco ASR 1000 Series Router for High Scalability Configuring Call Admission Control Control Plane Policing VPDN Group Session Limiting...
Page 8 Requesting a License Resend by Using Cisco License Call Home Configuration Examples for Cisco License Call Home Example: Installing Licenses or Upgrading Software by Using Cisco License Call Home Example: Rehosting a License by Using Cisco License Call Home Example: Requesting a License Resend by Using Cisco License Call Home...
Page 9 Sending a Call Home Test Message Manually Sending Call Home Alert Group Messages Manually Submitting Call Home Analysis and Report Requests Sending the Output of a Command to Cisco or an E-Mail Address How To Configure Call Home to Support the Smart Call Home Service Prerequisites...
Page 10 Copy Using TFTP or FTP NTP Server SYSLOG Server SNMP-Related Services Domain Name Assignment DNS service RADIUS or TACACS+ Server VTY lines with ACL Additional References Standards MIBs RFCs Technical Assistance Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 11 Restrictions for Bridge Domain Interfaces Information About Bridge Domain Interfaces Ethernet Virtual Circuit Overview Bridge Domain Interface Encapsulation Assigning a MAC Address Support for IP Protocols Support for IP Forwarding Packet Forwarding Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 12 Feature Information for Monitoring and Maintaining Multilink Frame Relay Configuring MPLS Layer 2 VPNs Finding Feature Information Contents Overview of L2VPN Interworking L2VPN Interworking Modes Ethernet or Bridged Interworking IP or Routed Interworking Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 13 Web User Interface General Overview Legacy Web User Interface Overview Graphics-Based Web User Interface Overview Persistent Web User Interface Transport Maps Overview Configuring the Router for Web User Interface Access Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xiii OL-16506-11...
Page 14 Copying a Startup Configuration File to an USB Flash Disk Copying a Startup Configuration File to a TFTP Server Enabling a Second IOS Process on a Single RP Using SSO ISSU—Consolidated Package Upgrade Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 15 Series Aggregation Services Routers. It is not intended as a comprehensive guide to all of the software features that can be run using the Cisco ASR 1000 Series Routers, but only the software aspects that are specific to these routers.
Page 16: Software Packaging And Architecture
Preface Document Revision History The Document Revision History records technical changes to this document. The table shows the Cisco IOS XE software release number and document revision number for the change, the date of the change, and a brief summary of the change.
Page 17 July 2, 2008 Added the “Configuring and Accessing the Web User Interface” section. Added Appendix “Configuration Examples”. IOS XE 2.1 May 2, 2008 First release of the book. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xvii OL-16506-11...
Page 18 Synchronous Ethernet on the Cisco ASR 1000 Series Routers. Configuring Bridge Domain Interfaces Provides an overview of configuration options for the Bridge Domain Interface on the Cisco ASR 1000 Series Routers. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xviii OL-16506-11...
Page 19: Related Documentation
Related Documentation This section refers you to other documentation that also might be useful as you configure your Cisco ASR 1000 Series Router. The documentation listed below is available online. Cisco ASR 1000 Series Routers Documentation The Cisco ASR 1000 Series has a documentation roadmap that provides listings to a broad range of documentation available for the Cisco ASR 1000 Series Routers.
Page 20: Obtaining Documentation And Submitting A Service Request
Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
Page 21: Software Packaging On The Cisco Asr 1000 Series Routers
• ASR 1000 Series Routers Software Overview The Cisco ASR 1000 Series Routers run using Cisco IOS XE software. Cisco IOS XE is released using consolidated packages and optional subpackages. Each consolidated package contains a collection of software subpackages. Each software subpackage is an individual software file that controls a different element or elements of the Cisco ASR 1000 Series Router.
Page 22: Important Information About Consolidated Packages
Consolidated Packages A consolidated package is a single image composed of individual software subpackage files. A single consolidated package file is a bootable file, and the Cisco ASR 1000 Series Router can be run using the consolidated package. Consolidated packages only contain the required individual subpackage files. These packages do not Note contain supplemental, optional subpackages, such as the “sipspawma”...
Page 23: Individual Software Subpackages Within A Consolidated Package
Individual Software SubPackages Within a Consolidated Package provides an overview of the Cisco ASR 1000 Series Routers subpackages and the purpose of each individual subpackage. Every consolidated package will have all of these individual subpackages. To see additional information about each individual subpackages in a particular Cisco IOS XE release, see Cisco IOS XE Release Notes for that release.
Page 24: Optional Software Subpackages Outside Of Consolidated Packages
Software Packaging on the Cisco ASR 1000 Series Routers Optional Software SubPackages Outside of Consolidated Packages Beginning in Cisco IOS XE Release 2.4, the ASR 1000 Series Routers support a new type of subpackage—this is an optional software subpackage that is available as a separate, external package that is downloaded and installed along with the other required subpackages.
Page 25: Important Notes About Provisioning Files
“packages.conf”, so no changes have to be made to the boot statement when Cisco IOS XE is upgraded (the boot system file-system:packages.conf configuration command can remain unmodified before and after an upgrade).
Page 26: Processes Overview
These processes run in the background, and the CLI on Cisco ASR 1000 Series Routers using Cisco IOS-XE is identical in look, feel, and usage to the Cisco IOS CLI on most platforms. This information is provided because it may be useful for checking router state and troubleshooting, but understanding this information is not essential to understanding most router operations.
Page 27 This architecture allows for better allocation of memory so the router can run more efficiently. Furthermore, the Cisco ASR 1000 Series Routers has a command-line interface in diagnostic mode that can be accessed in certain scenarios even if the IOS process fails. See the “Understanding the Diagnostic...
Page 28: File Systems On The Cisco Asr 1000 Series Router
Using SSO or RPR, a second IOS process can be enabled on a Cisco ASR 1002 or 1004 Router. On Cisco ASR 1000 Series Routers configured with dual Route Processors, the second IOS process runs on the standby Route Processor.
Page 29: Autogenerated File Directories And Files
Autogenerated File Directories and Files This section discusses the autogenerated files and directories that might appear on your Cisco ASR 1000 Series Routers, and how the files in these directories can be managed.
Page 30 Software Packaging and Architecture Processes Overview Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 31: Using Cisco Ios Xe Software
Using Cisco IOS XE Software This chapter provides information to prepare you to configure the Cisco ASR 100Series Routers: Accessing the CLI Using a Router Console, page 1 • Using the Auxiliary Port, page 4 • • Using Keyboard Shortcuts, page 5 •...
Page 32: Connecting To The Console Port
RJ-45-to-DB-9 DTE adapter (labeled “Terminal”). Using the Console Interface Every RP on a Cisco ASR 1000 Series Router has a console interface. Notably, a standby RP can be accessed using the console port in addition to the active RP in a dual RP configuration.
Page 33: Accessing The Cli From A Remote Console Using Telnet
In this syntax, host is the router hostname or an IP address, port is a decimal port number (23 is the default), and keyword is a supported keyword. For more information, see the Cisco IOS Configuration Fundamentals Command Reference Guide.
Page 34: Accessing The Cli From A Remote Console Using A Modem
To access the router remotely using a modem through an asynchronous connection, connect the modem to the console port. The console port on a Cisco 7600 series router is an EIA/TIA-232 asynchronous, serial connection with no flow control and an RJ-45 connector. The console port is located on the front panel of the RP.
Page 35: Using Keyboard Shortcuts
Ctrl-P or the Up Arrow key. Router# show history While in EXEC mode, list the last several commands you have just entered. 1. The arrow keys function only on ANSI-compatible terminals such as VT100s. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 36: Understanding The Command Mode
Cisco IOS XE. You use the CLI to access Cisco IOS XE software. Because the CLI is divided into many different modes, the commands available to you at any given time depend on the mode that you are currently in. Entering a question mark (?) at the CLI prompt allows you to obtain a list of commands available for each command mode.
Page 37: Understanding The Diagnostic Mode
60 seconds while the system is booting. Understanding the Diagnostic Mode Diagnostic mode is new on the Cisco ASR 1000 Series Routers. The router boots up or accesses diagnostic mode in the following scenarios: The IOS process or processes fail, in some scenarios. In other scenarios, the RP will simply reset •...
Page 38: Getting Help
ROMmon, to diagnose and troubleshoot IOS problems. The diagnostic mode commands are stored in the nonIOS packages on the Cisco ASR 1000 Series Routers, which is why the commands are available even if the IOS process is not working properly.
Page 39 Router(config)# interface serial 4/0 Router(config-if)# When the <cr> symbol is displayed, you can press Enter to complete the command. You are in interface configuration mode when the prompt changes to Router(config-if)#. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 40 Enable forwarding of directed broadcasts dvmrp DVMRP interface commands hello-interval Configures IP-EIGRP hello interval helper-address Specify a destination address for UDP broadcasts hold-time Configures IP-EIGRP hold time Router(config-if)# ip Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 41: Using The No And Default Forms Of Commands
For example, IP routing is enabled by default. To disable IP routing, use the no ip routing command; to re-enable IP routing, use the ip routing command. The Cisco IOS software command reference publications provide the complete syntax for the configuration commands and describe what the no form of a command does.
Page 42: Saving Configuration Changes
This configuration file storage setup is not unique to the Cisco ASR 1000 Series Routers and is used on several Cisco router platforms. As a matter of routine maintenance on any Cisco router, users should backup the startup configuration file by copying the startup configuration file from NVRAM onto one of the router’s other file systems...
Page 43: Filtering The Output Of The Show And More Commands
3517 bytes copied in 0.122 secs (28828 bytes/sec) For more detailed information on managing configuration files, see the Managing Configuration Files section in the Cisco IOS XE Configuration Fundamentals Configuration Guide. Filtering the Output of the show and more Commands You can search and filter the output of show and more commands.
Page 44: Powering Off A Router
To identify the set of software images available in a specific release or to find out if a feature is available in a given Cisco IOS XE software image, you can use Cisco Feature Navigator or the software release notes.
Page 45: Using The Software Advisor
Using the Software Advisor To see if a feature is supported by a Cisco IOS XE release, to locate the software document for that feature, or to check the minimum software requirements of Cisco IOS XE software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com at...
Page 46 Using Cisco IOS XE Software Finding Support Information for Platforms and Cisco Software Images Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 47: Console Port, Telnet, And Ssh Handling
Console Port Overview for the Cisco ASR 1000 Series Routers The console port on the Cisco ASR 1000 Series Router is an EIA/TIA-232 asynchronous, serial connection with no flow control and an RJ-45 connector. The console port is used to access the router and is located on the front panel of the Route Processor (RP).
Page 48: Telnet And Ssh Overview For The Cisco Asr 1000 Series Routers
Persistent Telnet and Persistent SSH Overview In traditional Cisco routers, accessing the router using Telnet or SSH is not possible in the event of an IOS failure. When Cisco IOS fails on a traditional Cisco router, the only method of accessing the router is through the console port.
Page 49: Configuring A Console Port Transport Map
Console Port, Telnet, and SSH Handling Configuring a Console Port Transport Map Configuring a Console Port Transport Map This task describes how to configure a transport map for a console port interface on the Cisco ASR 1000 Series Router. SUMMARY STEPS...
Page 50: Examples
Welcome to diagnostic mode Router(config-tmap)# banner wait X Enter TEXT message. End with the character 'X'. Waiting for IOS vty line Router(config-tmap)# exit Router(config)# transport type console 0 input consolehandler Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 51: Configuring Persistent Telnet
This task describes how to configure persistent Telnet on the Cisco ASR 1000 Series Routers. Prerequisites For a persistent Telnet connection to access an IOS vty line on the Cisco ASR 1000 Series Router, local login authentication must be configured for the vty line (the login command in line configuration mode).
Page 52 Example: Ethernet interface on the Cisco ASR 1000 Series Routers. Router(config-tmap)# transport interface gigabitethernet 0 This step must be taken before applying the transport map to the Management Ethernet interface. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 53: Examples
Router(config-tmap)# banner wait X Enter TEXT message. End with the character 'X'. --Waiting for IOS Process-- Router(config-tmap)# transport interface gigabitethernet 0 Router(config-tmap)# exit Router(config)# transport type persistent telnet input telnethandler Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 54: Configuring Persistent Ssh
Console Port, Telnet, and SSH Handling Configuring Persistent SSH Configuring Persistent SSH This task describes how to configure persistent SSH on the Cisco ASR 1000 Series Routers. SUMMARY STEPS (Required) enable (Required) configure terminal (Required) transport-map type persistent ssh transport-map-name...
Page 55 • Router(config-tmap)# for the vty line to become active. banner-message—The banner message, which begins • and ends with the same delimiting character. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 56: Examples
The transport map is then applied to the interface when the transport type persistent ssh input command is entered to enable persistent SSH: Router(config)# transport-map type persistent ssh sshhandler Router(config-tmap)# connection wait allow interruptible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 57: Viewing Console Port, Ssh, And Telnet Handling Configurations
Welcome to Diagnostic Mode Transport Map: Name: sshhandler Type: Persistent SSH Transport Interface: GigabitEthernet0 Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for IOS prompt Bshell banner: Welcome to Diagnostic Mode SSH: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 58 Router# show transport-map type persistent ssh Transport Map: Name: sshhandler Type: Persistent SSH Transport Interface: GigabitEthernet0 Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for IOS prompt Bshell banner: Welcome to Diagnostic Mode Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 59 Welcome to Diagnostic Mode Router# show transport-map name consolehandler Transport Map: Name: consolehandler Type: Console Transport Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for the IOS CLI Bshell banner: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 60 The show platform software configuration access policy output is given both before the new transport map is enabled and after the transport map is enabled so the changes to the SSH configuration are illustrated in the output. Router# show platform software configuration access policy Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 61 Wait banner : Waiting for IOS process Method : ssh Rule : wait with interrupt Shell banner: Welcome to Diag Mode Wait banner : Waiting for IOS Method : console Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 62: Important Notes And Restrictions
Telnet or SSH sessions. Configuring the diagnostic and wait banners is optional but recommended. The banners are • especially useful as indicators to users of the status of their Telnet or SSH attempts. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 63 Management This chapter discusses how consolidated packages and software subpackages (individual and optional) are managed and are used to run the Cisco ASR 1000 Series Aggregation Services Routers. It contains the following sections: Running the Cisco ASR 1000 Series Routers: An Overview, page 1 •...
Page 64: Consolidated Packages And Subpackages Management
When a Cisco ASR 1000 Series Router is configured to run using the consolidated package file, more memory is required to process router requests because the router has to search one larger file for every request.
Page 65: Running The Cisco Asr 1000 Series Routers: A Summary
Running the Cisco ASR 1000 Series Routers: An Overview A Cisco ASR 1000 Series Router configured to run using a consolidated package does have some advantages over a Cisco ASR 1000 Series Router configured to run individual subpackages. First, a consolidated package can be booted and utilized using TFTP or another network transport method.
Page 66: Software File Management Using Command Sets
USB Flash disk, or on any TFTP or other network server. Software File Management Using Command Sets Software files can be managed on the Cisco ASR 1000 Series Routers using three distinct command sets. This section provides overviews of the following command sets: •...
Page 67: The Copy Command
See the copy command reference for a list of the options that are available with the copy command. The issu Command Set The issu command set that is available on other Cisco routers is also available on the Cisco ASR 1000 Series Routers. The issu command set can be used to perform both consolidated package and individual subpackage upgrades.
Page 68: Managing And Configuring The Router To Run Using Consolidated Packages And Individual Subpackages
The issu runversion command is optional for completing a consolidated package upgrade on the Cisco ASR 1000 Series Routers. You can enter issu commitversion from the active RP to complete the software upgrade, then use the redundancy force-switchover command to switch to the upgraded RP on this platform, if desired.
Page 69: Managing And Configuring A Router To Run Using A Consolidated Package
To upgrade a consolidated package on the Cisco ASR 1000 Series Routers using the copy command, copy the consolidated package into the bootflash: directory on the router using the copy command as you would on most other Cisco routers. After making this copy, configure the router to boot using the consolidated package file.
Page 70: Managing And Configuring A Consolidated Package Using The Request Platform Software Package Install Command
--- Starting installation state synchronization --- Finished installation state synchronization --- Starting file path checking --- Finished file path checking --- Starting image file verification --- Checking image file names Verifying image file locations Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 71 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 72: Managing And Configuring A Router To Run Using Individual Subpackages From A Consolidated Package
Router(config)# no boot system Router(config)# config-register 0x2102 Router(config)# boot system flash bootflash:packages.conf Router(config)# exit *May 11 01:31:04.815: %SYS-5-CONFIG_I: Configured from console by con Router# copy running-config startup-config Building configuration... [OK] Router# reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 73 22124748 May 22 2008 11:26:28 -07:00 asr1000rp1-sipspa.02.01.00.122-33.XNA.pkg 57603 -rw- 6256 May 22 2008 11:26:28 -07:00 packages.conf -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz 928862208 bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 74 May 27 2008 14:25:04 -07:00 asr1000rp1-rpios-adventerprisek9.02.01.00.122-33.XNA.pkg 43984 -rw- 34324684 May 27 2008 14:25:05 -07:00 asr1000rp1-sipbase.02.01.00.122-33.XNA.pkg 43985 -rw- 22124748 May 27 2008 14:25:05 -07:00 asr1000rp1-sipspa.02.01.00.122-33.XNA.pkg 43971 -rw- 6256 May 27 2008 14:25:05 -07:00 packages.conf Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 75 22124748 May 22 2008 11:26:28 -07:00 asr1000rp1-sipspa.02.01.00.122-33.XNA.pkg 57603 -rw- 6256 May 22 2008 11:26:28 -07:00 packages.conf -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz 928862208 bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 76: Managing And Configuring A Router To Run Using Optional Subpackages
Building configuration... [OK] Router# reload Managing and Configuring a Router to Run Using Optional SubPackages To manage and configure a Cisco ASR 1000 Series Router to run using optional subpackages, perform the following tasks: Installing an Optional SubPackage, page 15 •...
Page 77: Installing An Optional Subpackage
Managing and Configuring the Router to Run Using Consolidated Packages and Individual SubPackages Installing an Optional SubPackage If you install the Cisco WebEx Node for ASR 1000 Series SPA before the software subpackage is Note installed, you will receive the error message %ASR1000_RP_SPA-3-MISSING_SPA_PKG_ERR. This message will resolve once you download and install the appropriate sipspawma subpackage and then reload the router in individual subpackage mode.
Page 78: Uninstalling An Optional Subpackage
Finished update running software SUCCESS: Finished installing software. Uninstalling an Optional SubPackage In Cisco IOS XE Release 2.4, the Cisco ASR 1000 Series Routers support removal of an installed optional subpackage. To uninstall an optional subpackage, perform the following steps:...
Page 79 Use the show version provisioned command to verify that the optional subpackage is no longer Step 2 installed. (Optional) Use the request platform software clean command to remove the unused packages. Step 3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 80: Troubleshooting Software Mismatch With Esp Board Asr1000-Esp10-N
This unrestricted product format, in which all encryption chips have been removed, can be provided in the Cisco ASR 1002, 1004, and 1006 Series Routers. This ESP must be used with the appropriate Cisco IOS XE 2.2 image that does not contain encryption software.
Page 81: Upgrading A Spa Subpackage
Do not run your router using subpackages from different consolidated packages. Caution The Cisco ASR 1000 Series Router is not designed to use multiple subpackages from different consolidated packages. Running subpackages from different consolidated packages is not recommended and can cause unpredictable router behavior.
Page 82 Applying interim IPC and database definitions Notifying running software of updates Unblocking peer synchronization of operating information Unmounting old packages Cleaning temporary installation files Finished update running software SUCCESS: Finished installing software. Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 83: Software Upgrade Process
Finding Feature Information in This Module Your Cisco IOS software release may not support all of the features documented in this module. To reach links to specific feature documentation in this module and to see a list of the releases in which each feature is supported, use the “Feature Information for Software Upgrade Process”...
Page 84: Contents
Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Page 85 These steps should be followed completely, as the Cisco ASR 1000 Series Routers are designed to run one version of Cisco IOS XE for all consolidated packages and subpackages on an RP, and running subpackages from different versions of Cisco IOS XE can cause unexpected router behavior.
Page 86: Issu Rollback Timer Overview
The Cisco ASR 1000 Series Router ISSU procedure has a rollback timer. Rollback timers are used for for ISSU procedures on all Cisco routers that support ISSU, but this section will provide a brief overview of ISSU rollback timers on the Cisco ASR 1000 Series Routers.
Page 87: Restrictions For Issu
For ATM SPAs on the Cisco ASR1000 Series Routers, ISSU from releases prior to Cisco IOS XE Release 2.5.0 to Cisco IOS XE Release 2.5.0, or from Cisco IOS XE Release 2.5.0 to a release prior to Cisco IOS XE Release 2.5.0, is not supported. If you want to perform ISSU in this environment, you must first remove the configuration from the ATM SPAs on the router, and then shut down the SPAs using the shutdown command prior to running the ISSU process.
Page 88: Using Issu To Perform A Consolidated Package Upgrade In A Dual Route Processor Configuration
Route Processor configurations. If you want the RPs on your Cisco ASR 1000 Series router to be running using a consolidated package after the ISSU upgrade is complete, use the following instructions: Note This procedure will only work if the current RPs are already running consolidated packages.
Page 89 RP. After you receive the message indicating that the Example: terminal state has been reached, go on to Step Router# issu loadversion rp 1 file stby-bootflash:asr1000rp1-adventerprisek9.02.01.01.12 2-33.XNA1.bin Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 90 This step is optional as long as Step 20 is completed Example: before the rollback timer expires. Router# issu acceptversion Step 20 Completes the ISSU upgrade. issu commitversion Example: Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 91 172.17.16.81 (via GigabitEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!! [OK - 209227980 bytes] 209227980 bytes copied in 329.215 secs (635536 bytes/sec) Router# copy bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin stby-bootflash: Destination filename [asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 92 Jun 5 2008 20:16:56 -07:00 asr1000rp1-rpbase.02.01.00.122-33.XNA.pkg 43975 -rw- 21946572 Jun 5 2008 20:16:57 -07:00 asr1000rp1-rpcontrol.02.01.00.122-33.XNA.pkg 43976 -rw- 48099532 Jun 5 2008 20:16:58 -07:00 asr1000rp1-rpios-adventerprisek9.02.01.00.122-33.XNA.pkg 43977 -rw- 34324684 Jun 5 2008 20:16:59 -07:00 asr1000rp1-sipbase.02.01.00.122-33.XNA.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 93 <additional output removed for brevity> *Jul 21 23:43:31.970: %SYS-5-RESTART: System restarted -- Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 94: Using Issu To Upgrade The Subpackages In A Dual Route Processor Configuration
This section provides instructions on performing an ISSU upgrade on a Cisco ASR 1000 Series Router with dual RPs that is currently running individual subpackages. This section covers the following topics: Using ISSU to Upgrade the SubPackages on a Cisco ASR 1006 or ASR 1013 Router (issu Command • Set), page 13 Using ISSU to Upgrade SubPackages on a Cisco ASR 1006 Router or ASR 1013 Router (request •...
Page 95 Software Upgrade Process ISSU Upgrade for Redundant Platforms Using ISSU to Upgrade the SubPackages on a Cisco ASR 1006 or ASR 1013 Router (issu Command Set) This section provides the instructions for performing an ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup using the issu command set.
Page 96 URL-to-active-file-system:asr1000rp1-esp*version*.pkg slot active-ESP-slot issu commitversion issu loadversion rp active-RP file URL-to-active-file-system:asr1000rp1*version*.pkg force show version active-RP provisioned show version active-RP installed redundancy force-switchover request platform software package clean Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 97 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 98 ISSU upgrade has been completed. target-URL Step 7 (Optional) Display the directory to confirm that the files were extracted. Example: Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 99 Router# copy usb0:221subs/asr1000rp1-rpaccess.02.02.01.122-3 3.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33. XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpcontrol.02.02.01.122- 33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpios-adventerprisek9.0 2.02.01.122-33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33 .XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33. XNB1.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 100 Example: Router# issu loadversion rp 1 file stby-bootflash:asr1000rp*02.02.01.122-33.XNB1*. pkg force standby-RP Step 11 Reload the standby RP. hw-module slot reload Example: Router# hw-module slot R1 reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 101 Step 15 (Optional) Confirm that the subpackages are provisioned show version provisioned active-RP show version installed and installed. Example: Router# show version r0 provisioned Router# show version r0 installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 102 Example: Router# request platform software package clean Examples The following example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup using the issu command set Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1)
Page 103 Package: rpbase, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: RP1 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 661bcb2efda479533c87f23504bf7021d42b3165 Package: rpaccess, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg , on: RP1 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 104 Package: sipbase, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP0 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 31b36be34aa63e0aafbb8abb2cc40a0cbcd5f68e Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP0/0 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 105 Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: inactive File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP1/2 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP1/3 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 106 Address or name of remote host []? 172.17.16.81 Source filename []? /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin Destination filename [asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin]? Accessing tftp://172.17.16.81//auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin... Loading /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin from 172.17.16.81 (via GigabitEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 107 51904716 bytes copied in 5.478 secs (9475122 bytes/sec) Router# copy usb0:221subs/asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 20533452 bytes copied in 2.346 secs (8752537 bytes/sec) Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 108 Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 26366156 bytes copied in 2.857 secs (9228616 bytes/sec) Router# copy usb0:221subs/asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 109 Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCC 36442316 bytes copied in 3.906 secs (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 110 New software will load on reboot. Router# hw-module slot r1 reload Router# *Sep 25 19:16:29.709: %ASR1000_OIR-6-OFFLINECARD: Card (rp) offline in slot R1 *Sep 25 19:16:29.787: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_NOT_PRESENT) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 111 WARNING: Candidate software combination not found in compatibility database WARNING: Software sets are identified as compatible Checking IPC compatibility with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 112 FPD ID=1) in the list of FPD IDs populated for SPA-4XT-SERIAL card in subslot 0/0. *Sep 29 15:13:21.634: %SPA_OIR-6-ONLINECARD: SPA (SPA-4XT-SERIAL) online in subslot 0/0Cleaning temporary installation files Finished update running software SUCCESS: Finished installing software. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 113 Constructing merge of running and candidate packages Finished candidate package set construction --- Starting compatibility testing --- Determining whether candidate package set is compatible WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 114 *Sep 29 15:18:32.259: %SPA_OIR-6-ONLINECARD: SPA (SPA-2X1GE-V2) online in subslot 1/1 *Sep 29 15:18:33.572: %SPA_OIR-6-ONLINECARD: SPA (SPA-1XOC12-POS) online in subslot 1/3Cleaning temporary installation files Finished update running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 115 Constructing merge of running and candidate packages Finished candidate package set construction --- Starting compatibility testing --- Determining whether candidate package set is compatible WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 116 --- Starting installation state synchronization --- Finished installation state synchronization --- Starting file path checking --- Finished file path checking --- Starting image file verification --- Checking image file names Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 117 Finding latest command set Finding latest command shortlist lookup file Finding latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 118 Determining whether candidate package set is compatible WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Determining whether installation is valid Software sets are identified as compatible Checking IPC compatibility with running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 119 --- Starting file path checking --- Finished file path checking --- Starting image file verification --- Checking image file names Verifying image file locations Locating image files and validating name syntax Inspecting image file types Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 120 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 32b3fceaf59e3acd7cf9937ef33a822d6b359887 Package: rpaccess, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_010 0_1.pkg, on: RP0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 7c8dfdf9b2e3602b0c6c531a88dd93c8d2d180c6 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 121 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a544cd10841b237066ccbc4714f4e23c00a9d2e5 Package: rpios-adventerprisek9, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP1/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 122 File: unknown, on: SIP1/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: active File: unknown, on: SIP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 123 BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_010 0_1.pkg, on: RP0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 7c8dfdf9b2e3602b0c6c531a88dd93c8d2d180c6 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpcontrol.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_01 00_1.pkg, on: RP0/0 Built: 2008-09-24_03.52, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 124 BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP1/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive File: bootflash:asr1000rp1-rpcontrol.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_01 00_1.pkg, on: RP1/1 Built: 2008-09-24_03.52, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 125 File: unknown, on: SIP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: inactive File: unknown, on: SIP1/2 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 126 File is in use, will not delete. asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_ 0100_1.pkg File is in use, will not delete. asr1000rp1-sipbase.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg File is in use, will not delete. asr1000rp1-sipspa.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg File is in use, will not delete. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 127 80924_0100_1.conf ... done. Deleting file bootflash:asr1000rp1-packages-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LAT EST_20080924_0100_1.conf ... done. Deleting file bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg ... done. Deleting file bootflash:asr1000rp1-rpbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg ... done. Deleting file bootflash:asr1000rp1-rpcontrol.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pk g ... done. Deleting file bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_200809 24_0100_1.pkg ... done. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 128: Using Issu To Upgrade Subpackages
SUCCESS: Files deleted. Using ISSU to Upgrade SubPackages on a Cisco ASR 1006 Router or ASR 1013 Router (request platform command set) This procedure can only be performed if the current ASR 1006 router or ASR 1013 router has two active RPs and both RPs are running subpackages.
Page 129 URL-to-active-file-system:asr1000rp1-esp*version*.pkg slot active-ESP-slot request platform software package install rp active-RP file URL-to-active-file-system:asr1000rp*version*.pkg force show version active-RP provisioned show version active-RP installed redundancy force-switchover request platform software package clean Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 130 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 131 ISSU upgrade has been completed. target-URL Step 6 (Optional) Displays the directory to confirm that the files were extracted. Example: Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 132 Router# copy usb0:221subs/asr1000rp1-rpaccess.02.02.01.122-3 3.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33. XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpcontrol.02.02.01.122- 33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpios-adventerprisek9.0 2.02.01.122-33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33 .XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33. XNB1.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 133 *.pkg force Example: Router# request platform software package install rp 1 file stby-bootflash:asr1000rp*02.02.01.122-33.XNB1*. pkg force standby-RP Step 10 Reloads the standby RP. hw-module slot reload Example: Router# hw-module slot R1 reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 134 Step 14 (Optional) Confirms the subpackages are provisioned and show version provisioned active-RP show version installed installed. Example: Router# show version r0 provisioned Router# show version r0 installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 135 (Optional) Removes all unused subpackage files from the request platform software package clean router. Examples This example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1)
Page 136 RP1 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 661bcb2efda479533c87f23504bf7021d42b3165 Package: rpaccess, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg , on: RP1 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: b0dc8e07cd4f997b045280fa79051e41068c6f3e Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 137 File: bootflash:asr1000rp1-sipbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP0 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 31b36be34aa63e0aafbb8abb2cc40a0cbcd5f68e Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP0/0 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 138 File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP1/2 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP1/3 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 139 Address or name of remote host []? 172.17.16.81 Source filename []? /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin Destination filename [asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin]? Accessing tftp://172.17.16.81//auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin... Loading /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin from 172.17.16.81 (via GigabitEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!! [OK - 209227980 bytes] Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 140 51904716 bytes copied in 5.478 secs (9475122 bytes/sec) Router# copy usb0:221subs/asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 20533452 bytes copied in 2.346 secs (8752537 bytes/sec) Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 141 Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 26366156 bytes copied in 2.857 secs (9228616 bytes/sec) Router# copy usb0:221subs/asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 142 Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCC 36442316 bytes copied in 3.906 secs (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 143 Finished commit of software changes SUCCESS: Software provisioned. New software will load on reboot. Router# hw-module slot r1 reload Router# *Sep 25 18:20:15.371: %ASR1000_OIR-6-OFFLINECARD: Card (rp) offline in slot R1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 144 Determining whether installation is valid WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Software sets are identified as compatible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 145 Notifying running software of updates Unblocking peer synchronization of operating information *Sep 29 13:49:01.336: %SPA_OIR-6-ONLINECARD: SPA (SPA-4XT-SERIAL) online in subslot 0/0 *Sep 29 13:49:03.344: %LINK-3-UPDOWN: Interface Serial0/0/2, changed state to downUnmounting old packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 146 --- Starting image file verification --- Checking image file names Verifying image file locations Locating image files and validating name syntax Inspecting image file types Processing image file constraints Creating candidate provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 147 *Sep 29 13:53:01.373: %SPA_OIR-6-OFFLINECARD: SPA (SPA-4X1FE-TX-V2) offline in subslot 1/0 *Sep 29 13:53:01.378: %SPA_OIR-6-OFFLINECARD: SPA (SPA-2X1GE-V2) offline in subslot 1/1 *Sep 29 13:53:01.381: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1XOC12-POS) offline in subslot 1/3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 148 Verifying existing software set Processing candidate provisioning file Constructing working set for candidate package set Constructing working set for running package set Checking command output Constructing merge of running and candidate packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 149 --- Starting installation state synchronization --- Finished installation state synchronization --- Starting file path checking --- Finished file path checking --- Starting image file verification --- Checking image file names Verifying image file locations Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 150 Finding latest command shortlist lookup file Finding latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Replacing CLI software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 151 Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Finished compatibility testing --- Starting impact testing --- Checking operational impact of change Finished impact testing Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 152 WARNING: requires software reboot of target RP Processing image file constraints Creating candidate provisioning file Finished image file verification --- Starting candidate package set construction --- Verifying existing software set Processing candidate provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 153 00_1.pkg, on: RP0/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a544cd10841b237066ccbc4714f4e23c00a9d2e5 Package: rpios-adventerprisek9, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP0/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 154 00_1.pkg, on: RP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a544cd10841b237066ccbc4714f4e23c00a9d2e5 Package: rpios-adventerprisek9, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive File: bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 155 File: unknown, on: SIP1/3 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: inactive File: unknown, on: SIP2 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 156: In Service One-Shot Software Upgrade Procedure
ISSU Procedures (Prior to Cisco IOS XE Release 2.1.2) These instructions should be followed only if you are upgrading using ISSU to a pre-Cisco IOS XE 2.1.2 release. If you are using Cisco IOS XE Release 2.2.1 or later, follow the earlier instructions in this chapter to perform your ISSU upgrade.
Page 157 This procedure will work on single RPs configured to run two IOS processes or on routers configured with dual RPs. Versions of Cisco IOS XE Release 2.1 prior to Cisco IOS XE Release 2.1.2 and versions of Cisco IOS XE Release 2.2 prior to Cisco IOS XE Release 2.2.1 and installations not booted from the RPBase subpackage on Cisco IOS XE Release 2.2.1 or 2.1.2 require a different ISSU upgrade procedure.
Page 158: Upgrade Process With Service Impact For Nonredundant Platforms
Consolidated package mode does not provide such a per-slot staging option and always incurs a traffic loss equivalent to simultaneous OIR of all SIPs. The Cisco ASR 1002 and ASR 1002-F Routers come by default with 4-GB DRAM. The Cisco ASR 1001 Note Router comes by default with 4-GB DRAM, and is upgradeable up to 8-GB or 16-GB DRAM.
Page 159 In the example show version output, the router has 4 GB of DRAM memory. If you are using a Cisco ASR 1001, Cisco ASR 1002, or Cisco ASR 1004 Router with 2-GB DRAM memory on the RP, SSO cannot be configured on your RP.
Page 160 In this example, the show platform command output reveals that R0/0 is the active IOS process and R0/1 is the standby IOS process: Router# show platform Chassis type: ASR1004 Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- ASR1000-SIP10 00:52:34 SPA-2X1GE-V2 00:51:30 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 161 00:51:57 Using SubPackages for Software Upgrade on a Cisco ASR 1001 Router This section provides instructions on using software upgrade for Cisco ASR 1001 Router running subpackages. These instructions assume two IOS processes are active on the RP and that the router is already running using subpackages.
Page 162 0 file file-system:asr1001-{rpbase,sipbase,sipspa,espbase}*version*.pkg force show version installed reload Step 17 does not have to be performed immediately, and should be done at a convenient time. Note Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 163 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 164 Example: Router# copy 221subs/asr1001-espbase.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-rpaccess.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-rpbase.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-rpcontrol.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-rpios-universalk9.03.02.01.S.151-1. S1_2.pkg bootflash: Router# copy 221subs/asr1001-sipbase.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-sipspa.03.02.01.S.151-1.S1_2.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 165 (a different bay than in ion-string*.pkg bay standby-bay force Step Example: Router# issu loadversion rp 0 file bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02. 01.S.151-1.S1_2*.pkg bay 0 force Step 14 Commit the software version. issu commitversion Example: Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 166 It is highly recommended reload to avoid conflicts in the software base. Examples The following example shows the software upgrade for Cisco ASR 1001 Router running subpackages. Router#show version Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Experimental Version 15.1(20110301:124851) [asr1001-universalk9.03.02.01.S.151-1.S1] Copyright (c) 1986-2011 by Cisco Systems, Inc.
Page 167 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 168 Router(config)# ip tftp source-interface gigabitethernet 0 Router# copy tftp: 221subs Address or name of remote host []? 172.27.55.254 Source filename []? /auto/users/asr1001-universalk9.03.02.01.S.151-1.S1_2.bin,12 Destination filename [asr1001-universalk9.03.02.01.S.151-1.S1.bin,12]? Accessing tftp://172.27.55.254//auto/users/asr1001-universalk9.03.02.01.S.151-1.S1_2.bin,12... Loading /auto/users/asr1001-universalk9.03.02.01.S.151-1.S1.bin,12 (via GigabitEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 169 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 51904716 bytes copied in 5.478 secs (9475122 bytes/sec) Router# copy 221subs/asr1001-rpaccess.03.02.01.S.151-1.S1_2.pkg bootflash: Destination filename [asr1001-rpaccess.03.02.01.S.151-1.S1_2.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 170 Router# issu loadversion rp 0 file bootflash:221subs/asr1001-{rpaccess,rpios,rpcontrol}*03.02.01.S.151-1.S1_2.pkg bay 1 force --- Starting local lock acquisition on R0 --- Finished local lock acquisition on R0 --- Starting file path checking --- Finished file path checking Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 171 No old package files removed New files list: Added asr1001-rpaccess.03.02.01.S.151-1.S1_2.pkg Added asr1001-rpcontrol.03.02.01.S.151-1.S1_2.pkg Added asr1001-rpios-universalk9.03.02.01.S.151-1.S1_2.pkg Finished list of software package changes --- Starting commit of software changes --- Updating provisioning rollback files Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 172 *Mar 15 16:31:00.015: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_DOWN) *Mar 15 16:31:00.015: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_REDUNDANCY_) *Mar 15 16:31:00.328: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up *Mar 15 16:31:00.328: %LINK-3-UPDOWN: Interface EOBC0, changed state to up Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 173 Software sets are identified as compatible Verifying image type compatibility Checking IPC compatibility with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 174 *Mar 15 16:37:01.961: %CMRP-6-THROUGHPUT_LICENSE: R0/0: cmand: Throughput liceG *Mar 15 16:37:06.571: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: 0 is pre-relean Notifying running software of updates Unblocking peer synchronization of operating information Unmounting old packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 175 Checking infrastructure compatibility with running software ... skipped Checking package specific compatibility Finished compatibility testing --- Starting list of software package changes --- Old files list: Removed asr1001-espbase.03.02.01.S.151-1.S1.pkg Removed asr1001-rpbase.03.02.01.S.151-1.S1.pkg Removed asr1001-sipbase.03.02.01.S.151-1.S1.pkg Removed asr1001-sipspa.03.02.01.S.151-1.S1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 176 New software will load on reboot. Router# reload Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (software upgrade Command Set) This section provides instructions on using software upgrade for Cisco ASR 1002 or 1004 Router running subpackages.
Page 177 Note Step 19, 20, and 21 does not have to be performed immediately, and can be done at a convenient time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 178 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 179 ISSU upgrade has been completed. Step 7 (Optional) Display the directory to confirm that the files dir target-URL were extracted. Example: Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 180 Example: Router# issu loadversion rp 0 file bootflash:asr1000rp1-{rpaccess,rpios,rpcontrol} *02.02.01.122-33.XNB1*.pkg bay 1 force Step 10 Once the SSO state is reached, commit the software issu commitversion version. Example: Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 181 122-33.XNB1*.pkg slot 2 force See the “ISSU Procedures (Prior to Cisco IOS XE Router# issu commitversion Release 2.1.2)” section on page 74 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 182 (Optional) Removes the unused subpackages from the request platform software package clean router. Examples The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running sub-packages: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1)
Page 183 Slot CPLD Version Firmware Version --------- ------------------- --------------------------------------- 07091401 12.2(33r)XN1 07062111 12.2(33r)XN2 07091401 12.2(33r)XN1 Router# mkdir usb0:221subs Create directory filename [221subs]? Created dir bootflash:221subs Router(config)# ip tftp source-interface gigabitethernet 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 184 72003 -rw- 224768204 Oct 7 2008 15:38:57 -07:00 asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin 928862208 bytes total (466358272 bytes free) Router# copy usb0:221subs/asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 185 Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCC 36442316 bytes copied in 3.906 secs (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 186 Checking operational impact of change WARNING: Connection may be lost during installation of IOS package Finished impact testing --- Starting commit of software changes --- Updating provisioning rollback files Creating pending provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 187 *Sep 25 18:07:39.888: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO) Router# Router# issu commitversion --- Starting installation changes --- Cancelling rollback timer Finished installation changes SUCCESS: Installation changes committed Router# redundancy force-switchover Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 188 *Sep 25 18:09:16.717: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5)) *Sep 25 18:11:00.500: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded *Sep 25 18:11:00.502: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO) Router# show platform Chassis type: ASR1004 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 189 Checking package specific compatibility Finished compatibility testing --- Starting impact testing --- Checking operational impact of change WARNING: Connection may be lost during installation of IOS package Finished impact testing Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 190 *Sep 25 18:14:47.232: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: 0:0 is pre-release hardware *Sep 25 18:14:47.299: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4)) *Sep 25 18:14:47.299: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5)) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 191 Committing provisioning file Finished commit of software changes --- Starting analysis of software changes --- Finished analysis of software changes --- Starting update running software --- Blocking peer synchronization of operating information Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 192 *Sep 29 11:06:48.410: %SPA_OIR-6-ONLINECARD: SPA (SPA-5X1GE-V2) online in subslot 0/3 Router# Router# Router# issu commitversion --- Starting installation changes --- Cancelling rollback timer Finished installation changes SUCCESS: Installation changes committed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 193 Finding latest command shortlist lookup file Finding latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Replacing CLI software Restarting software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 194 Software sets are identified as compatible Checking IPC compatibility with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Finished compatibility testing Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 195 CPP 0 running init image /usr/cpp/bin/cpp-mcplo-ucode *Sep 25 18:24:01.077: %CPPHA-7-READY: F0: cpp_ha: CPP 0 loading and initialization complete Router# *Sep 25 18:24:01.077: %CPPHA-6-SYSINIT: F0: cpp_ha: CPP HA system configuration start. Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 196 SUCCESS: Software provisioned. New software will load on reboot. Router# show version provisioned Package: Provisioning File, version: n/a, status: active File: bootflash:packages.conf, on: RP0 Built: n/a, by: n/a File SHA1 checksum: aca136bd8bcb99f87e6aa7a0ce2a92a3b5a5a200 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 197 1.pkg, on: RP1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 32b3fceaf59e3acd7cf9937ef33a822d6b359887 Package: rpaccess, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_010 0_1.pkg, on: RP1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 7c8dfdf9b2e3602b0c6c531a88dd93c8d2d180c6 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 198 File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: inactive File: unknown, on: SIP0/2 --More-- Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: active File: unknown, on: SIP0/3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 199 Router# request platform software package clean Cleaning up unnecessary package files No path specified, will use booted path bootflash:packages.conf Cleaning bootflash: Scanning boot directory for packages ... done. Preparing packages list to delete ... asr1000rp1-espbase.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 200 Do you want to proceed? [confirm]y Deleting file bootflash:asr1000-rommon.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg ... done. Deleting file bootflash:asr1000-rommon.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.p kg ... done. Deleting file bootflash:asr1000rp1-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_010 0_1.bin ... done. Deleting file bootflash:asr1000rp1-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080 924_0100_1.bin ... done. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 201 Deleting file bootflash:packages.conf.05- ... done. SUCCESS: Files deleted. Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (request platform Command Set) This section provides instructions on using software upgrade for Cisco ASR 1002 or 1004 Router running subpackages using the request platform command set.
Page 202 0 file file-system:asr1000rp*version*.pkg show version provisioned reload request platform software package clean Step 16, 17, 18 does not have to be performed immediately, and can be done at a convenient Note time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 203 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 204 ISSU upgrade has been completed. target-URL Step 7 (Optional) Display the directory to confirm that the files were extracted. Example: Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 205 0 file subpackages in the standby bay. file-system :asr1000rp1-{rpaccess,rpios,rpcontrol version-string standby-bay *.pkg bay force Example: Router# request platform software package install rp 0 file bootflash:asr1000rp1-{rpaccess,rpios,rpcontrol} *02.02.01.122-33.XNB1*.pkg bay 1 force Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 206 XE Releases. bootflash:asr1000rp1-{sipspa,sipbase}*02.02.01. See the “ISSU Procedures (Prior to Cisco IOS XE 122-33.XNB1*.pkg slot 2 force Release 2.1.2)” section on page 74 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 207 (Optional) Removes the unused subpackages from the request platform software package clean router. Examples The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running sub-packages: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1)
Page 208 Create directory filename [221subs]? Created dir bootflash:221subs Router(config)# ip tftp source-interface gigabitethernet 0 Router# copy tftp: usb0:221subs Address or name of remote host []? 172.17.16.81 Source filename []? /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin Destination filename [asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 209 928862208 bytes total (466358272 bytes free) Router# copy usb0:221subs/asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 51904716 bytes copied in 5.478 secs (9475122 bytes/sec) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 210 Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCC 36442316 bytes copied in 3.906 secs (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 211 --- Starting commit of software changes --- Updating provisioning rollback files Creating pending provisioning file Committing provisioning file Finished commit of software changes --- Starting analysis of software changes --- Finished analysis of software changes Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 212 *Sep 25 11:31:33.401: %NETCLK-5-NETCLK_MODE_CHANGE: Network clock source not available. The network clock has changed to freerun *Sep 25 11:31:33.438: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_NOT_PRESENT) *Sep 25 11:31:33.438: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_DOWN) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 213 State Insert time (ago) --------- ------------------- --------------------- ----------------- ASR1000-SIP10 00:31:12 SPA-1XOC12-POS 00:11:35 SPA-2XOC3-POS 00:11:35 SPA-5X1GE-V2 00:11:35 ASR1000-RP1 00:31:12 R0/0 ok, standby 00:05:38 R0/1 ok, active 00:13:36 ASR1000-ESP10 ok, active 00:31:12 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 214 *Sep 25 11:39:35.632: %ACE-3-INITFAIL: ASR1000-ESP(14): initialization failed (timed out)Finished commit of software changes --- Starting analysis of software changes --- Finished analysis of software changes --- Starting update running software --- Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 215 Locating image files and validating name syntax Inspecting image file types Processing image file constraints Creating candidate provisioning file Finished image file verification --- Starting candidate package set construction --- Verifying existing software set Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 216 Restarting software Restarting SIP0 Applying final IPC and database definitions *Sep 29 10:11:16.631: %ASR1000_OIR-6-OFFLINECARD: Card (cc) offline in slot 0 *Sep 29 10:11:16.632: %ASR1000_OIR-6-REMSPA: SPA removed from subslot 0/0, interfaces disabled Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 217 Constructing working set for running package set Checking command output Constructing merge of running and candidate packages Finished candidate package set construction --- Starting compatibility testing --- Determining whether candidate package set is compatible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 218 Inspecting image file types Processing image file constraints Creating candidate provisioning file Finished image file verification --- Starting candidate package set construction --- Verifying existing software set Processing candidate provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 219 *Sep 25 12:43:27.892: %ASR1000_OIR-6-OFFLINECARD: Card (fp) offline in slot F0 *Sep 25 12:43:29.992: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: F0:0 is pre-release hardware Generating software version information Notifying running software of updates Unblocking peer synchronization of operating information Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 220 --- Starting compatibility testing --- Determining whether candidate package set is compatible Determining whether installation is valid Determining whether installation is valid ... skipped Checking IPC compatibility for candidate software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 221 File is in use, will not delete. packages.conf File is in use, will not delete. done. Files that will be deleted: asr1000-rommon.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000-rommon.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg asr1000rp1-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.bin asr1000rp1-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1 .bin asr1000rp1-espbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000rp1-packages-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100 _1.conf asr1000rp1-packages-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_200809 24_0100_1.conf asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000rp1-rpbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000rp1-rpcontrol.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 222 Deleting file bootflash:packages.conf.00- ... done. Deleting file bootflash:packages.conf.01- ... done. Deleting file bootflash:packages.conf.02- ... done. Deleting file bootflash:packages.conf.03- ... done. Deleting file bootflash:packages.conf.04- ... done. Deleting file bootflash:packages.conf.05- ... done. SUCCESS: Files deleted. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 223: Additional References
Software Upgrade Process Additional References Additional References The following sections provide references related to the Software Upgrade Process feature. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 224: Related Documents
MIBs MIBs Link None To locate and download MIBs for selected platforms, Cisco IOS XE software releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs RFCs...
Page 225: Feature Information For Software Upgrade Process
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 226 Software Upgrade Process Feature Information for Software Upgrade Process Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 227: High Availability Overview
This guide covers the aspects of High Availability that are unique to the Cisco ASR 1000 Series Routers. It is not intended as a comprehensive guide to High Availability, nor is it intended to provide information on High Availability features that are available on other Cisco routers that are configured and implemented identically on the Cisco ASR 1000 Series Routers.
Page 228: Software Redundancy On The Cisco Asr 1000 Series Routers
Hardware Redundancy Overview on the Cisco ASR 1000 Series Routers Some models of the Cisco ASR 1000 Series Routers offer hardware redundancy within the same Cisco ASR 1000 Series Router through the following methods: Allowing two Route Processors (RPs) in the same Cisco ASR 1000 Series Router •...
Page 229: Software Redundancy Overview
SIPs and SPAs on the router continue to be fully operational. Software Redundancy on the Cisco ASR 1000 Series Routers This section covers the following topics: Software Redundancy Overview, page 4 • Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 230: Second Ios Process On A Cisco Asr 1002 Or 1004 Router
IOS process can only run on the standby Route Processor. 1. If a critical process, such as the ESP or the SIP fails on the Cisco ASR 1001 Router, then the entire chassis reloads. Second IOS Process on a Cisco ASR 1002 or 1004 Router For Cisco ASR 1002 and 1004 routers, Route Processor Redundancy and Stateful Switchover can be used to switch between IOS processes.
Page 231: Route Processor Redundancy
High Availability switchover features such as Nonstop Forwarding/Stateful Switchover (NSF/SSO). On the Cisco ASR 1000 Series Router, RPR can also be used to enable a second IOS process on a single RP for a Cisco ASR 1002 or 1004 Router. See the “Second IOS Process on a Cisco ASR 1002 or 1004...
Page 232: Ipsec Failover
High Availability Overview IPsec Failover On the Cisco ASR 1000 Series Router, SSO can also be used to enable a second IOS process on a single RP for a Cisco ASR 1002 or 1004 Router. See the “Second IOS Process on a Cisco ASR 1002 or 1004 Router”...
Page 233: Standards
Standards Standard Title None — MIBs MIBs Link None To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at this URL: http://www.cisco.com/go/mibs RFCs Title None — Technical Assistance Description Link The Cisco Support and Documentation website http://www.cisco.com/cisco/web/support/index.html...
Page 234: Feature Information For High Availability Overview
Series Router. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 235: Broadband Scalability And Performance
The infrastructure of a service provider must be capable of supporting the services that an enterprise customer or Internet service provider (ISP) wants to offer its subscribers. The service provider must also be able to scale up to an expanding subscriber base. You can configure the Cisco ASR1000 Series Routers for high broadband scalability.
Page 236: Restrictions For Ppp Sessions And L2Tp Tunnel Scaling
Table 18 lists the hardware combinations and the maximum number of PPP sessions and L2TP tunnels that are supported in Cisco IOS XE Release 3.3. For information about the restrictions for PPP sessions and L2TP tunnel scaling, see the “Restrictions for PPP Sessions and L2TP Tunnel Scaling”...
Page 237: Ip Sessions Scaling
Table 20 Maximum Number of IP Sessions Supported on ASR 1000 Hardware Chassis IP Session ISG Traffic Class 1001 Integrated ESP-2.5G or ESP-5G 8000 24000 1002 Integrated RP1 ESP-5G 12000 36000 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 238: Layer 4 Redirect Scaling
For more information about restrictions and limitations, see the “Restrictions for PPP Sessions and L2TP Tunnel Scaling” section on page To ensure high scalability on the Cisco ASR 1000 Series Router, perform the following configuration tasks: • Configuring Call Admission Control, page 5 Control Plane Policing, page 5 •...
Page 239: Monitoring Ppp Sessions Using The Snmp Management Tools
The Control Plane Policing feature allows you to configure a QoS filter that manages the traffic flow of control plane packets to protect the control plane of Cisco IOS XE routers and switches against reconnaissance and denial-of-service (DoS) attacks. The control plane thus helps maintain packet forwarding and protocol states despite an attack or heavy traffic load on the router or switch.
Page 240: Configuring The Keepalive Command
Broadband Scalability and Performance Configuring the Cisco ASR 1000 Series Router for High Scalability VPDN Group Session Limiting Using the Virtual Private Dialup Network (VPDN) Group Session Limiting feature, you can limit the number of VPDN sessions allowed per VPDN group. VPDN session limits can increase performance and reduce latency for routers that are otherwise forced to operate at high capacity.
Page 241: Using The Cisco-Avpair="Lcp:interface-Config" Radius Attribute
Using the cisco-avpair="lcp:interface-config" RADIUS Attribute When you use the lcp:interface-config RADIUS attribute to reconfigure the virtual access subscriber interface, scaling decreases on the Cisco ASR 1000 Series Router for the following reasons: • The lcp:interface-config command syntax includes an IOS interface configuration command. This command is any valid IOS command that can be applied to an interface.
Page 242: Enhancing The Scalability Of Per-User Configurations
You can specify one VSA value in a user profile on RADIUS and another value locally in the virtual template interface. The Cisco ASR 1000 Series Router clones the template and then applies the values configured in the profiles it receives from RADIUS, resulting in the removal of any IP configurations when the router applies the profile values.
Page 243: Redefining User Profiles To Use The Ip:vrf-Id And Ip:ip-Unnumbered Vsas
This situation is especially true when the Cisco ASR 1000 Series Router attempts to apply a large number of per-user profiles that include the lcp:interface-config VSA. Therefore, when updating your user profiles, we recommend that you redefine the lcp:interface-config VSA to the scalable ip:vrf-id and ip:ip-unnumbered VSAs.
Page 244: Isg Scaling To Support Lite Sessions
Table 22 are the target-sustained rates. However, after events such as failover or reload, the rates might exceed these numbers for some period before falling back to the sustained values. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 245: Mibs
Standards Standard Title None — MIBs MIBs Link None To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at this URL: http://www.cisco.com/go/mibs RFCs Title None — Technical Assistance Description Link The Cisco Support and Documentation website provides online http://www.cisco.com/cisco/web/support/index.html...
Page 246: Feature Information For Broadband Scalability And Performance
Series Router. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 247: Configuring Cisco License Call Home
This module describes the tasks and the commands used to activate software by using the Cisco License Call Home feature, license keys, and Cisco EXEC commands. When you activate software from a Cisco device, you can license software without the need for additional application software.
Page 248: Cisco License Call Home Interface
The router or switch must have an Internet connection and use HTTPS to connect to the • Cisco licensing infrastructure. To set up a secure HTTP connection, see the HTTP 1.1 Web Server and Client chapter in the HTTP Services Configuration Guide: http://www.cisco.com/en/US/docs/ios-xml/ios/https/configuration/xe-3s/https-xe-3s-book.html...
Page 249: How To Configure Cisco License Call Home
Requesting a License Resend by Using Cisco License Call Home, page 5 (optional) Installing Licenses or Upgrading Software by Using Cisco License Call Home Perform this task to install a license or upgrade software by using the Cisco License Call Home feature. SUMMARY STEPS Obtain the PAK.
Page 250: Rehosting A License By Using Cisco License Call Home
Rehosting a License by Using Cisco License Call Home Perform this task to rehost (revoke and transfer) a license by using the Cisco License Call Home feature. The rehost operation is performed by using a source and a target unique device identifier (UDI).
Page 251: Requesting A License Resend By Using Cisco License Call Home
Configuring the Cisco IOS Software Activation Feature module. Requesting a License Resend by Using Cisco License Call Home Perform this task to retrieve all licenses this device owns (device from which this command is run) by using the license call-home resend command.
Page 252: Configuration Examples For Cisco License Call Home
The following example shows how to use the license call-home install pak command to install a license by using the Cisco License Call Home feature. The command also displays prompts for mandatory information. The show license feature command is used to verify the installation.
Page 253 Router# Example: Rehosting a License by Using Cisco License Call Home The following example shows how to use the license call-home revoke udi command to revoke and transfer a license by using source and target UDIs. The command also displays prompts for mandatory information.
Page 254 Store Index: 0 Store Name: Evaluation License Storage Example: Requesting a License Resend by Using Cisco License Call Home The following examples shows how to use the license call-home resend command to obtain all licenses this device owns and store them in the specified location: Router# license call-home resend flash:licenseresend.lic...
Page 255: Rfcs
Standards Standard Title None — MIBs MIBs Link None To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at this URL: http://www.cisco.com/go/mibs RFCs Title None — Technical Assistance Description Link The Cisco Support and Documentation website http://www.cisco.com/cisco/web/support/index.html...
Page 256: Feature Information For Cisco License Call Home
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 257: Configuring Call Home
Finding Feature Information in This Module Your Cisco IOS software release may not support all of the features documented in this module. To reach links to specific feature documentation in this module and to see a list of the releases in which each feature is supported, use the “Feature Information for Call Home”...
Page 258: Benefits Of Using Call Home
CiscoTAC-1 profile is used to send alerts to the backend server of the Smart Call Home service, which can be used to create service requests to the Cisco TAC (depending on the Smart Call Home service support in place for your device and the severity of the alert).
Page 259: Prerequisites For Call Home
How to Obtain Smart Call Home Service If you have a service contract directly with Cisco Systems, you can register your Call Home devices for the Cisco Smart Call Home service. Smart Call Home provides fast resolution of system problems by analyzing Call Home messages sent from your devices and providing background information and recommendations.
Page 260: Configuring The Management Interface Vrf
Configuring Call Home How to Configure Call Home If Cisco Smart Call Home is used, verify an active service contract exists for the device being • configured. How to Configure Call Home To configure Call Home, complete the following tasks:...
Page 261: Configuring A Destination Profile
Router(config-if)# ip address 10.10.10.10 0.0.0.0 What To Do Next To find out more about the Gigabit Ethernet Management interface on the Cisco ASR 1000 Series Routers or perform additional related configuration tasks on the management interface, see the “Using the Management Ethernet Interface” section on page 1 Configuring a Destination Profile A destination profile contains the required delivery information for an alert notification.
Page 262: Configuring A Destination Profile To Send Email Messages
XML. The default is XML. For the predefined Cisco TAC profile, only XML is allowed. If you use the Cisco Smart Call Home service, the destination profile must use the XML message format.
Page 263 If you have not configured the management interface VRF, see the “Configuring the Management Interface VRF” section on page To associate the management interface VRF with Call Home, complete the following steps: SUMMARY STEPS configure terminal call-home vrf Mgmt-intf Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 264 To configure a destination profile for e-mail transport, complete the following steps: SUMMARY STEPS configure terminal call-home profile name destination transport-method email destination address email email-address destination preferred-msg-format {long-text | short-text | xml} destination message-size bytes active exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 265 3145728 bytes. Example: Router(cfg-call-home-profile)# destination message-size 3145728 Step 8 (Optional) Enables the destination profile. By default, a active user-defined profile is enabled when it is created. Example: Router(cfg-call-home-profile)# active Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 266: Configuring A Destination Profile To Send Http Messages
Call Home e-mail messages. Example: Router(cfg-call-home)# sender reply-to username@example.com Configuring a Destination Profile to Send HTTP Messages To configure Call Home to send HTTP (or HTTPS) messages, complete the following tasks: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 267 To configure a destination profile for http transport, complete the following steps: SUMMARY STEPS configure terminal call-home profile name destination transport-method http destination address http url destination preferred-msg-format {long-text | short-text | xml} destination message-size bytes active Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 268 Configuring Call Home How to Configure Call Home exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 269 Example: Router(cfg-call-home-profile)# destination message-size 3,145,728 Step 8 Enables the destination profile. By default, a profile is active enabled when it is created. Example: Router(cfg-call-home-profile)# active Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 270: Working With Destination Profiles
31. That section describes how to configure a CA trustpoint for a secure Cisco server to use with the Smart Call Home service, but can be applied to other secure server configuration as needed by your site using the required certificate for your secure server.
Page 271 Router(cfg-call-home)# end Copying a Destination Profile To create a new destination profile by copying an existing profile, complete the following steps: SUMMARY STEPS configure terminal call-home copy profile source-profile target-profile Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 272 • the profile. Renaming a Destination Profile To change the name of an existing profile, complete the following steps: SUMMARY STEPS configure terminal call-home rename profile source-profile target-profile Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 273: Subscribing To Alert Groups
By default, the CiscoTAC-1 profile is inactive and uses email as the default transport method. To use email transport, you only need to enable the profile. However, to use this profile with the Cisco Smart Call Home service secure server (via HTTPS), you not only must enable the profile, but you must also...
Page 274: Periodic Notification
(level 0). However, the default is not recommended due to the number of messages that will be triggered. Call Home severity levels are not the same as system message logging severity levels. Note Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 275: Syslog Pattern Matching
[periodic {daily hh:mm | monthly date hh:mm | weekly day hh:mm}] subscribe-to-alert-group syslog [severity {catastrophic | critical | debugging | disaster | fatal | major | minor | normal | notification | warning}] [pattern string] exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 276 [severity {catastrophic | critical | debugging | Environment alert group, with an optional severity disaster | fatal | major | minor | normal | level. notification | warning}] Example: Router(cfg-call-home-profile)# subscribe-to-alert-group environment severity major Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 277: Configuring Contact Information
ID, customer ID, and site ID. To assign the contact information, complete the following steps: SUMMARY STEPS configure terminal call-home contact-email-addr email-address phone-number +phone-number street-address street-address customer-id text site-id text contract-id text Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 278 Enter up to 64 characters. If you include spaces, you must enclose your entry within double quotation marks (“ Example: ”). Router(cfg-call-home)# contract-id Company1234 Example The following example shows the configuration of contact information: Router# configure terminal Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 279: Configuring The Number Of Call Home Messages Sent Per Minute
Example: Router(cfg-call-home)# rate-limit 40 Enabling and Disabling Call Home To enable or disable the Call Home feature, complete the following steps: SUMMARY STEPS configure terminal service call-home no service call-home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 280: Sending Call Home Communications Manually
• Submitting Call Home Analysis and Report Requests, page 25 • Sending the Output of a Command to Cisco or an E-Mail Address, page • Sending a Call Home Test Message Manually You can use the call-home test command to send a user-defined Call Home test message.
Page 281 Submitting Call Home Analysis and Report Requests You can use the call-home request command to submit information about your system to Cisco Systems to receive helpful analysis and report information specific to your system. You can request a variety of reports, including security alerts, known bugs, best practices, and command references.
Page 282 If a profile name is specified, the request is sent to the profile. If no profile is specified, the request • is sent to the Cisco TAC profile. The recipient profile does not need to be enabled for the call-home request. The profile should specify the e-mail address where the transport gateway is configured so that the request message can be forwarded to the Cisco TAC and the user can receive the reply from the Smart Call Home service.
Page 283: How To Configure Call Home To Support The Smart Call Home Service
Cisco TAC (attach@cisco.com). The e-mail is sent in long text format with the service number, if specified, in the subject line. The service number is required only if no e-mail address is specified, or if a Cisco TAC e-mail •...
Page 284: Prerequisites
The CiscoTAC-1 profile is predefined in the Call Home feature to communicate using email to the backend server for the Smart Call Home service. The URL to the Cisco HTTPS backend server is also predefined. This profile is inactive by default.
Page 285 How To Configure Call Home to Support the Smart Call Home Service SUMMARY STEPS configure terminal call-home profile CiscoTAC-1 destination transport-method http active exit contact-email-addr email-address exit service call-home exit copy running-config startup-config Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 286: Examples
Step 8 Exits call home configuration mode and returns to global exit configuration mode. Example: Router(cfg-call-home)# exit Step 9 Enables the Call Home feature. service call-home Example: Router(config)# service call-home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 287: Declare And Authenticate A Ca Trustpoint
Example: Router# copy running-config startup-config Declare and Authenticate a CA Trustpoint To establish communication with the Cisco HTTPS server for Smart Call Home service, you must declare and authenticate the Cisco server security certificate. SUMMARY STEPS configure terminal...
Page 288 Step 9 Exits global configuration mode and returns to privileged EXEC mode. Example: Router# end Step 10 Saves the configuration to NVRAM. copy running-config startup-config Example: Router# copy running-config startup-config Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 289: Start Smart Call Home Registration
Configuring Call Home How To Configure Call Home to Support the Smart Call Home Service Examples The following example shows the configuration for declaring and authenticating the Cisco server security certificate: Router# configure terminal Router(config)# crypto pki trustpoint cisco Router(ca-trustpoint)# enrollment terminal...
Page 290: Displaying Call Home Configuration Information
CiscoTAC-1 What To Do Next To receive an email from Cisco Systems and follow the instructions to complete the device registration in the Smart Call Home web application: Launch the Smart Call Home web application at the following URL: •...
Page 291 +14085551234 street address: 1234 Any Street Any city Any state 12345 customer ID: customer@example.com contract ID: 123456789 site ID: example.com Mail-server[1]: Address: smtp.example.com Priority: 1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 292 Preferred Message Format: long-text Message Size Limit: 3145728 Bytes Transport Method: email Email address(es): username@example.com HTTP address(es): Not yet set up Alert-group Severity ------------------------ ------------ inventory normal Syslog-Pattern Severity ------------------------ ------------ Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 293 Preferred Message Format: long-text Message Size Limit: 3145728 Bytes Transport Method: email Email address(es): username@example.com HTTP address(es): Not yet set up Alert-group Severity ------------------------ ------------ inventory normal Syslog-Pattern Severity ------------------------ ------------ Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 294 Example: Call Home Statistics Router# show call-home statistics Message Types Total Email HTTP ------------- -------------------- -------------------- ------------------ Total Success Config Diagnostic Environment 0 Inventory SysLog Test Request Send-CLI Total In-Queue Config Diagnostic Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 295: Default Settings
Destination message size for a message sent in long text, short text, or XML format 3,145,728 Alert group status Enabled Call Home message severity threshold 0 (debugging) Message rate limit for messages per minute Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 296: Alert Group Trigger Events And Commands
— — — Events related to power, fan, and environment sensing elements, such as temperature alarms. (Sent to TAC.) CLI commands executed: show platform show environment show inventory show logging Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 297 SPA inserted in subslot (slot/subslot HARDWARE_I number). NSERTION — CC/FP/RP %ASR1000_OIR-6-REMCARD Card (cc/rp/fp) removed from slot HARDWARE_ (slot number). REMOVAL — CC/FP/RP %ASR1000_OIR-6-INSCARD Card (cc/rp/fp) inserted in slot (slot HARDWARE_I number). NSERTION Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 298: Message Contents
This section also includes the following subsections that provide sample messages: Sample Syslog Alert Notification in Long Text Format, page 46 • Sample Syslog Alert Notification in XML Format, page 50 • Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 299 ID by any support service. ContractData/ContractId Site ID Optional user-configurable field used for site IDs supplied CallHome/CustomerData/ by Cisco Systems or other data meaningful to alternate ContractData/SiteId support services. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 300 The following fields may be repeated if multiple CLI commands are executed for this alert group. Command output The exact name of the issued CLI command. /aml/Attachments/Attachment/Name name Attachment type Attachment type. Usually “inline”. /aml/Attachments/Attachment@type Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 301 Supervisor module Top-level software version. CallHome/Device/Cisco_Chassis/ software version AdditionalInformation/AD@name= “SoftwareVersion” FRU name Name of the affected FRU generating the event message. CallHome/Device/Cisco_Chassis/ Cisco_Card/Model FRU s/n Serial number of FRU. CallHome/Device/Cisco_Chassis/ Cisco_Card/SerialNumber Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 302: Sample Syslog Alert Notification In Long Text Format
No Active Message Discriminator. No Inactive Message Discriminator. Console logging: disabled Monitor logging: level debugging, 0 messages logged, xml disabled, filtering disabled Buffer logging: level debugging, 112 messages logged, xml disabled, Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 303 3 07:16:35.134: %IOSXE-6-PLATFORM: F0: cpp_cp: Process CPP_PFILTER_EA_EVENT__API_CALL__REGISTER *Dec 3 07:16:38.965: %CMRP-6-FP_HA_STATUS: R0/0: cmand: F0 redundancy state is Active with ready Standby *Dec 3 07:17:01.926: %DYNCMD-7-PKGINT_INSTALLED: The command package 'platform_trace' has been succesfully installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 304 3 12:17:13.754 IST: %LINK-3-UPDOWN: Interface POS0/2/3, changed state to down *Dec 3 12:17:13.754 IST: %LINK-3-UPDOWN: Interface POS0/2/4, changed state to down *Dec 3 12:17:13.754 IST: %LINK-3-UPDOWN: Interface POS0/2/5, changed state to down Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 305 Command Output Name : show inventory Attachment Type : command output MIME Type : text/plain Command Output Text : NAME: "Chassis", DESCR: "Cisco ASR1006 Chassis" PID: ASR1006 , VID: V00, SN: FOX105101DH NAME: "module 0", DESCR: "Cisco ASR1000 SPA Interface Processor 10"...
Page 306: Sample Syslog Alert Notification In Xml Format
NAME: "module F1", DESCR: "Cisco ASR1000 Embedded Services Processor, 10Gbps" PID: ASR1000-ESP10 , VID: V00, SN: JAB111101AP NAME: "Power Supply Module 0", DESCR: "Cisco ASR1006 AC Power Supply" PID: TBD000000000000000, VID: +^A , SN: ART1114Q00F NAME: "Fan Module 1", DESCR: "Cisco ASR1006 Fan Module"...
Page 307 <rme:AD name="SystemDescription" value="Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Experimental Version 12.2(20091118:075558) [v122_33_xnf_asr_rls6_throttle-mcp_dev_rls6 102] Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Wed 18-Nov-09 01:14 by " /> </rme:AdditionalInformation> </rme:Chassis> </ch:Device> </ch:CallHome> Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 308 Success. *Dec 3 07:16:27.669: %CPPHA-7-START: F1: cpp_ha: CPP 0 preparing image /tmp/sw/fp/1/0/fp/mount/usr/cpp/bin/cpp-mcplo-ucode *Dec 3 07:16:27.839: %CPPHA-7-START: F1: cpp_ha: CPP 0 startup init image /tmp/sw/fp/1/0/fp/mount/usr/cpp/bin/cpp-mcplo-ucode Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 309 3 12:17:07.476 IST: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up *Dec 3 12:17:08.137 IST: %SPA_OIR-6-ONLINECARD: SPA (SPA-4XOC3-POS) online in subslot 1/3 *Dec 3 12:17:08.139 IST: %SPA_OIR-6-ONLINECARD: SPA (SPA-8XOC3-POS) online in subslot 0/2 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 310 3 12:17:16.488 IST: %LINK-3-UPDOWN: SIP1/3: Interface POS1/3/0, changed state to up *Dec 3 12:17:17.868 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS1/3/0, changed state to up *Dec 3 12:17:16.199 IST: %LINK-3-UPDOWN: SIP2/3: Interface POS2/3/0, changed state to up Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 311 NAME: "module F1", DESCR: "Cisco ASR1000 Embedded Services Processor, 10Gbps" PID: ASR1000-ESP10 , VID: V00, SN: JAB111101AP NAME: "Power Supply Module 0", DESCR: "Cisco ASR1006 AC Power Supply" PID: TBD000000000000000, VID: +^A , SN: ART1114Q00F NAME: "Fan Module 1", DESCR: "Cisco ASR1006 Fan Module"...
Page 312 Configuring Call Home Message Contents PID: TBD000000000000000, VID: +^A , SN: ART1115P00D Router#]]></aml-block:Data> </aml-block:Attachment> </aml-block:Attachments> </aml-block:Block> </soap-env:Body> </soap-env:Envelope> Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 313: Additional References
Configuring Call Home Additional References Additional References The following sections provide references related to the Call Home feature. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 314: Related Documents
MIBs MIBs Link CISCO-CALLHOME-MIB To locate and download MIBs for selected platforms, Cisco IOS XE software releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs RFCs...
Page 315: Technical Assistance
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 316 Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide Copyright © 2008 - 2012 Cisco Systems, Inc. All rights reserved. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 317: Configuring Cisco Right-To-Use License
Feature Information for Cisco Right-To-Use License, page Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Page 318: Overview
Restrictions for Cisco Right-To-Use License The restrictions and limitations for the Right-To-Use license include: On the Cisco ASR 1001 Router, if you downgrade from IOS XE.3.6.0S image to a prior release, all the installed licenses become invalid and you cannot use the associated features.
Page 319 For information on accepting the EULA, see Example: Accepting Global EULA, page Evaluation and Right-To-Use Licenses Table 1 lists the Evaluation and Right-To-Use licenses available on the Cisco ASR 1000 Series Routers. Table 1 Evaluation and Right-To-Use Licenses Right-To- Evaluation...
Page 320: How To Activate An Evaluation License
Command or Action Purpose Step 1 enable Enables privileged EXEC mode. Enter your password if prompted. • Example: Router>enable Step 2 configure terminal Enters global configuration mode. Example: Router#configure terminal Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 321: Configuration Examples For Right-To-Use Supported Software Licenses
Example: Accepting EULA for Software Redundancy License, page 6 • Example: Accepting EULA for Inter-Chassis Redundancy License, page 7 • Example: Accepting EULA for Lawful Intercept License, page 8 • Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 322: Configuring Throughput
It is your responsibility determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period. Your acceptance this agreement for the software features on one product...
Page 323 It is your responsibility determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period. Your acceptance this agreement for the software features on one product...
Page 324 Configuration Examples for Right-To-Use Supported Software Licenses responsibility determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period. Your acceptance this agreement for the software...
Page 325: Example: Sample Output For Show Commands
Use of this product feature requires an additional license from Cisco, together with an additional payment. You may use this product feature on an evaluation basis, without payment to Cisco, for 60 days. Your use of the product, including during the 60 day...
Page 326: Sample Output For The Show License All Command
Evaluation period left: 8 weeks 4 days Period used: 0 minute second License Count: Non-Counted License Priority: None StoreIndex: 5 Feature: sw_redundancy Version: 1.0 License Type: RightToUse License State: Active, In Use Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 327: Additional References
MIBs MIBs Link • snmp-server view INTERCEPT_VIEW To locate and download MIBs for selected platforms, Cisco software ciscoIpTapMIB releases, and feature sets, use Cisco MIB Locator found at the following URL: • snmp-server view INTERCEPT_VIEW cisco802TapMIB http://www.cisco.com/go/mibs snmp-server view INTERCEPT_VIEW •...
Page 328: Technical Assistance
Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 329: Feature Information For Cisco Right-To-Use License
Software Licenses, page 5 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 330 Configuring Cisco Right-To-Use License Feature Information for Cisco Right-To-Use License Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 331: Using The Management Ethernet Interface
Using the Management Ethernet Interface The Cisco ASR 1000 Series Routers have one Gigabit Ethernet Management Ethernet interface on each Route Processor. Finding Feature Information in This Module Your software release might not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release.
Page 332: Gigabit Ethernet Management Interface Overview
In a dual RP configuration, the Management Ethernet interface on the active RP will always be Gigabit Ethernet 0, while the Management Ethernet interface on the standby RP will not be accessible using the Cisco IOS CLI in the same telnet session. The standby RP can be telnetted to through the console port, however.
Page 333: Viewing The Vrf Configuration
Management Ethernet interface. This section documents tasks that might be common or slightly tricky on the Cisco ASR 1000 Series Routers. It is not intended as a comprehensive list of all tasks that can be done using the Management Ethernet interface.
Page 334: Domain Name Assignment
VRF label allocation mode: per-prefix Setting a Default Route in the Management Ethernet Interface VRF To set a default route in the Management Ethernet Interface VRF, enter the following command Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 335: Setting The Management Ethernet Ip Address
GigabitEthernet 0 command must be entered before entering the copy ftp command because the copy ftp command has no option of specifying a VRF name. TFTP Example Router(config)# ip tftp source-interface gigabitethernet 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 336: Ntp Server
Router(config)# ip name-server vrf Mgmt-intf IPv4-or-IPv6-address RADIUS or TACACS+ Server To group the Management VRF as part of a AAA server group, enter the ip vrf forward Mgmt-intf command when configuring the AAA server group. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 337: Vty Lines With Acl
To ensure an access control list (ACL) is attached to vty lines that are and are not using VRF, use the vrf-also option when attaching the ACL to the vty lines. Router(config)# line vty 0 4 Router(config-line)# access-class 90 in vrf-also Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 338: Additional References
Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform.
Page 339 XE 2.1S Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 340 Using the Management Ethernet Interface Feature Information for Using the Management Ethernet Interface Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 341: Network Synchronization Support
If the network devices that constitute a network do not operate at the same clock rates, there is an overall decrease in the performance of the network and a consequent degradation in the quality of the services offered by the network. This document explains how to configure network synchronization on Cisco ASR 1000 Series Aggregation Services Routers.
Page 342: Network Synchronization Overview
2048 kHz 2048 kHz Table 2 lists the framing modes for a BITS port on the other Cisco ASR 1000 Series Aggregation Services Routers. Table 2 Framing Modes for a BITS Port on the Other Cisco ASR 1000 Series Aggregation...
Page 343 BITS interface. The cleaned up clock is received back from the SSU. This clock is used as the Tx clock for the SyncE ports. For Cisco ASR 1000 Series Routers, the interface from which the clock is recovered and the BITS port to the SSU must reside on the same card.
Page 344 SPAs that support Network Synchronization SPA Type Hybrid SPA_TYPE_HYBRID_2KP Prowler SPA_TYPE_PRO_1xCHOC3_STM1 Chopper SPA_TYPE_CHOP_1xCHOC12 CEOP SPA_TYPE_CEOP_1xOC3 SPA_TYPE_CEOP_24xT1E1 SPA_TYPE_TATM_1xOC3 SPA_TYPE_TATM_2xOC3 SPA_TYPE_TATM_3xOC3 SPA_TYPE_TATM_1xOC12 SPA_TYPE_POS_2xOC3 SPA_TYPE_POS_4xOC3 SPA_TYPE_POS_1xOC12 SPA_TYPE_POS_2xOC12 SPA_TYPE_POS_MF_4xOC3 SPA_TYPE_POS_MF_8xOC3 SPA_TYPE_POS_MF_2xOC12 SPA_TYPE_POS_MF_4xOC12 SPA_TYPE_POS_MF_8xOC12 SPA_TYPE_POS_SRP_OC192 SPA_TYPE_POS_SRP_OC192_XFP SPA_TYPE_POS_SRP_1xOC48 SPA_TYPE_POS_SRP_2xOC48 SPA_TYPE_POS_SRP_4xOC48 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 345: Clock Selection Algorithm
The clock selection process works in the following modes: QL-Enabled Mode, page 6 • • QL-Disabled Mode, page 6 When multiple selection processes are present in a network element, all the processes work in the same mode. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 346: Restrictions And Usage Guidelines
Both these algorithms are mutually exclusive. The Line to External feature for the clock cleanup is supported only if the line interface and the • external interface are on the same metronome SPA. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 347: Configuring Clock Recovery From Synce
The Line to External feature is not supported on the Cisco ASR 1002-X Router. Note Configuring Network Synchronization You can configure network synchronization on the Cisco ASR 1000 Series Routers by performing one of the following procedures: • Configuring Clock Recovery from SyncE, page 7 Configuring Clock Recovery from a BITS Port, page 8 •...
Page 348: Configuring Clock Recovery From Bits Port As An Input-Source
Router(config)# network-clock input-source 1 external 0/3/0 t1 esf Router(config)# exit The following example shows how to configure clock recovery from a BITS port for RP BITS on Cisco ASR 1000 Series Aggregation Services Routers with dual RP: Router# configure terminal...
Page 349 Router(config)# network-clock output-source 1 external 0/3/0 t1 esf Router(config)# exit The following example shows how to configure clock recovery from a BITS port for RP BITS on Cisco ASR 1000 Series Aggregation Services Routers with dual RP: Router# configure terminal...
Page 350: Configuring Synce By Using The Line To External Feature
Configuring SyncE by Using the Line to External Feature This section describes how to configure network synchronization by using the Line to External feature. The Line to External feature is not supported on Cisco ASR 1002-X Router. Note SUMMARY STEPS...
Page 351: Managing Synchronization On The Cisco Asr 1000 Series Router
Network Synchronization Support Configuring Network Synchronization Managing Synchronization on the Cisco ASR 1000 Series Router Manage synchronization on a Cisco ASR 1000 Series Router using the following management commands: • Quality-Level-Enabled Clock Selection Use the network-clock synchronization mode QL-enabled command in the global configuration mode to configure the automatic selection process for the QL-enabled mode.
Page 352: Verifying The Network Synchronization Configuration
Use the show network-clock synchronization command to display the output: • Router# show network-clock synchronization Symbols: En - Enable, Dis - Disable, Adis - Admin Disable NA - Not Applicable - Synchronization source selected - Synchronization source force selected Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 353 Last transition recorded: (src_rem)-> 1A (src_added)-> 1A (src_rem)-> 1A (src_added)-> 1A (ql_change)-> 1A (sf_change)-> 1A (force_sw)-> 1C (clear_sw)-> 1A (sf_change)-> 1A (sf_change)-> 1A Nominated Interfaces Interface SigType Mode/QL Prio QL_IN ESMC Tx ESMC Rx Internal NA/Dis QL-ST3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 354 Wait-to-restore: 300 Lock Out: FALSE Signal Fail: FALSE Alarms: FALSE Slot Disabled: FALSE • Use the show esmc command to displays the ESMC configuration output: Router# show esmc Interface: GigabitEthernet0/0/0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 355 ESMC Tx Timer: Running ESMC Rx Timer: Running ESMC Tx interval count: 1 ESMC INFO pkts in: 0 ESMC INFO pkts out: 256 ESMC EVENT pkts in: 0 ESMC EVENT pkts out: 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 356: Troubleshooting The Network Synchronization Configuration
Ensure that the nonrevertive configurations are in place. • Incorrect QL values Ensure that there is no framing mismatch with the SSM option. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 357 For the SSM option network-clock 1, framing should be SDH or E1, and for SSM option 2, it should be T1. synchronization detail command. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 358: Additional References
Standards Standard Title None — MIBs MIBs Link None To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at this URL: http://www.cisco.com/go/mibs RFCs Title None — Technical Assistance Description Link The Cisco Support and Documentation website http://www.cisco.com/cisco/web/support/index.html...
Page 359: Feature Information For Network Synchronization Support
Cisco ASR 1002-X Router. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 360 Network Synchronization Support Feature Information for Network Synchronization Support Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 361: Configuring Bridge Domain Interfaces
Configuring Bridge Domain Interfaces The Cisco ASR 1000 Series Aggregation Services Routers support the bridge domain interface (BDI) feature for packaging Layer 2 Ethernet segments into Layer 3 IP. Finding Feature Information Your software release might not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release.
Page 362: Ethernet Virtual Circuit Overview
It embodies the different parameters on which the service is being offered. In the Cisco EVC Framework, the bridge domains are made up of one or more Layer 2 interfaces known as service instances. A service instance is the instantiation of an EVC on a given port on a given router.
Page 363: Bridge Domain Interface Encapsulation
Domain Interface, page Assigning a MAC Address All the bridge domain interfaces on the Cisco ASR 1000 chassis share a common MAC address. The first bridge domain interface on a bridge domain is allocated a MAC address. Thereafter, the same MAC address is assigned to all the bridge domain interfaces that are created in that bridge domain.
Page 364: Layer 2 To Layer
2 encapsulation and forwards the frame to the corresponding bridge domain. The byte counters are updated. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 365: Link States Of A Bridge Domain And A Bridge Domain Interface
BDI Link State As with all Cisco IOS interfaces, a BDI maintains a link state that comprises of three states, administratively down, operationally down, and up. The link state of a BDI is derived from two independent inputs, the BDI administrative state set by the corresponding users and the fault indication state from the lower levels of the interface states.
Page 366: Creating Or Deleting A Bridge Domain Interface
Layer 2 bridge domain, the packets are treated as output packets and bytes, and the counters are updated accordingly. A BDI maintains a standard set of Layer 3 packet counters as the case with all Cisco IOS interfaces. Use the show interface command to view the Layer 3 packet counters.
Page 367 How to Configure a Bridge Domain Interface SUMMARY STEPS configure terminal interface BDI interface number encapsulation encapsulation dot1q <first-tag> [second-dot1q <second-tag>] ip address ip-address mask mac-address {mac-address} no shut shut Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 368 Step 1 Enters the global configuration mode. configure terminal Example: Router# configure terminal Step 2 Specifies a bridge domain interface on a Cisco ASR 1000 interface BDI {interface number} Series Aggregation Services Router. Example: Router(config)# interface BDI3 Step 3 Defines the encapsulation type.
Page 369 Manager of the ESP processor in slot R0 is set to the informational tracing level (max): Router(config)# platform trace boottime slot R0 bay 1 process forwarding-manager forwarding-manager level max For additional information on the commands and the options available with each command, see the Cisco IOS Configuration Fundamentals Command Reference Guide located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html...
Page 370: Additional References
Standards Standard Title None — MIBs MIBs Link None To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at this URL: http://www.cisco.com/go/mibs RFCs Title None — Technical Assistance Description Link The Cisco Support and Documentation website http://www.cisco.com/cisco/web/support/index.html...
Page 371: Feature Information For Configuring Bridge Domain Interfaces
Information About Bridge Domain Interfaces, page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 372 Configuring Bridge Domain Interfaces Feature Information for Configuring Bridge Domain Interfaces Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 373: Monitoring And Maintaining Multilink Frame Relay
“Feature Information for Monitoring and Maintaining Multilink Frame Relay” section on page Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Page 374: Feature Overview
• Route Processor and Embedded Service Processor trace messages for the forwarding manager process. For additional information on the commands and the options available for each command, see the Cisco IOS Configuration Fundamentals Command Reference document, located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 375: Additional References
Standards Standard Title None — MIBs MIBs Link None To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at this URL: http://www.cisco.com/go/mibs RFCs Title None — Technical Assistance Description Link The Cisco Support and Documentation website http://www.cisco.com/cisco/web/support/index.html...
Page 376: Feature Information For Monitoring And Maintaining Multilink Frame Relay
Series Router. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 377: Configuring Mpls Layer 2 Vpns
“Feature Information for Configuring MPLS Layer 2 VPNs” section on page Use the Cisco Feature Navigator to find information about platform support and Cisco IOS and Cisco Catalyst operating system software image support. To access the Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
Page 378: L2Vpn Interworking Modes
Several types of interworking functions exist. The function that is used depends on the AC type used, the type of data carried, and the level of functionality required. The two main Layer 2 Virtual Private Network (L2VPN) interworking functions supported in Cisco IOS XE software are bridged interworking and routed interworking.
Page 379: Ip Or Routed Interworking
Interworking requires that the MTUs in both the ACs must match for the pseudowire that is to come • up. The default MTU in one AC must match the MTU of other AC. Table 1 lists the range of MTUs that can be configured for different ACs. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 380: Prerequisites For Frame Relay Dlci-To-Atm Aal5Snap Bridged Interworking
Pseudowire using EoMPLS Pseudowire using EoMPLS Pseudowire using EoMPLS DLCI Tunnel LSP Frame Relay ATM Link Link ATM CE ATM PE P Router P Router FR PE FR CE MPLS Network Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 381 The PE router automatically supports translation of both Cisco and IETF Frame Relay encapsulation types coming from the Customer edge (CE) router, but translates only to IETF when sending to the CE router. The Cisco CE router can handle the IETF encapsulation on receipt, even if it is configured to send Cisco encapsulation.
Page 382: Configuring Frame Relay Dlci-To-Atm Aal5Snap Bridged Interworking
[.subinterface-number {point-to-point}] mtu bytes no atm enable-ilmi-trap pvc [name] vpi/vci l2transport encapsulation encapsulation-type Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 383 Configuring MPLS Layer 2 VPNs Configuring Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking xconnect peer-ip-address vc-id encapsulation mpls pw-class pw-class-name exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 384 Router(config)# pseudowire-class atm-fr-bridged Step 10 Enables MPLS encapsulation on the interface. encapsulation mpls Example: Router(config-pw-class)# encapsulation mpls Step 11 Enables the L2VPN Ethernet interworking feature. interworking ethernet Example: Router(config-pw-class)# interworking ethernet Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 385 Removes the previously configured IP address. no ip address Example: Router(config-if)# no ip address Step 23 Enables the ATM interface to generate the transmit atm clock internal clock internally. Example: Router(config-if)# atm clock internal Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 386: Example: Frame Relay-To-Atm Bridged Interworking On An Atm-Pe Router
ATM-PE router: no ip domain lookup mpls label range 101 4000 static 4001 5001 mpls label protocol ldp mpls ip default-route mpls ldp graceful-restart xconnect logging pseudowire status Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 387 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 388 GigabitEthernet slot/subslot/port ip address ip-address mask negotiation auto mpls ip exit connect connection-name interface dlci l2transport xconnect peer-ip-address vc-id encapsulation mpls pw-class pw-class-name exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 389 Configures a T1 controller and enters the controller controller t1 slot/subslot/port configuration mode. Example: Router(config)# controller T1 0/3/0 Step 10 Selects the Extended Super Frame (ESF) for a T1 framing esf data line. Example: Router(config-controller)# framing esf Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 390 Router(config)# interface loopback 0 Step 21 Specifies the IP address for the Loopback interface. ip address ip-address mask Example: Router(config-if)# ip address 44.1.1.2 255.255.255.255 Step 22 Exits the interface configuration mode. exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 391 Router(config-if)# negotiation auto Step 32 Enables MPLS forwarding of the IPv4 packets mpls ip towards the MPLS core. Example: Router(config-if)# mpls ip Step 33 Exits the interface configuration mode. exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 392: Example: Frame Relay-To-Atm Bridged Interworking On A Frame Relay-Pe Router
101 switched interface GigabitEthernet1/3/1 ip address 10.10.1.1 255.255.255.0 negotiation auto mpls ip connect fr-atm-2 Serial0/3/0:0 101 l2transport xconnect 44.1.1.2 100 pw-class atm-fr-bridged Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 393: Gigabit Etherchannel For Virtual Private Wire Service
GEC. This feature enables service providers to supply connectivity between customer sites having data link layer (Layer 2) networks, by using a single, integrated, packet-based network infrastructure—a Cisco MPLS network. Instead of separate networks with separate network management environments, service providers can deliver Layer 2 connections over an MPLS backbone.
Page 394: Restrictions For Gigabit Etherchannel For Virtual Private Wire Service
GEC for VPWS does not support Q-in-Q encapsulation and remote port shutdown. • A maximum four member links are supported under the port channel and a maximum of 64 port • channel bundles are supported per router. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 395: Configuring Gigabit Etherchannel For Virtual Private Wire Service
GigabitEthernet slot | subslot | port channel-group port-channel number Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 396 Step 10 Exits the xconnect configuration mode. exit Step 11 Creates an EtherChannel interface on the Cisco Cable interface port-channel number Modem Termination System (CMTS). Example: Router(config)# interface port-channel 1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 397: Etherchannel-To-Etherchannel Over Mpls Interworking
GigabitEthernet slot | subslot | port channel-group port-channel number Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 398 AToM static pseudowire, specifies MPLS as the tunneling method, and enters the xconnect configuration mode. Example: Router(config-if)# xconnect 10.0.0.1 707 encapsulation mpl pseudowire-class gec-routed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 399: Example: Gec Like-To-Like (Routed) Interworking
1 xconnect 190.1.1.1 100 encapsulation mpls pw-class gec-bridged interface GigabitEthernet0/0/3 channel-group 1 interface GigabitEthernet0/0/2 channel-group 1 router ospf 10 log-adjacency-changes network 44.1.1.2 0.0.0.0 area 0 network 10.10.1.2 0.0.0.255 area 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 400: Any-To-Etherchannel Over Mpls (Bridged) Interworking
Configuring MPLS Layer 2 VPNs Configuring Gigabit EtherChannel for Virtual Private Wire Service Any-to-EtherChannel over MPLS (Bridged) Interworking You can configure Any-to-EtherChannel over MPLS (Bridged) interworking on the Cisco ASR 1000 Series Routers. Any-to-EtherChannel over MPLS (Bridged) interworking supports the following modes: •...
Page 401 AToM static pseudowire, specifies MPLS as the tunneling method, and enters the xconnect configuration mode. Example: Router(config-if)# xconnect 10.0.0.1 707 encapsulation mpl pseudowire-class gec-bridged Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 402: Any-To-Etherchannel Over Mpls (Routed) Interworking
Ethernet-to-EtherChannel over MPLS (Bridge) Interworking mode is also supported under VLAN. Note Any-to-EtherChannel over MPLS (Routed) Interworking You can configure Any-to-EtherChannel over MPLS (Routed) interworking on the Cisco ASR 1000 Series Routers. Any-to-EtherChannel over MPLS (Routed) interworking supports the following modes: ATM-to-EtherChannel •...
Page 403 | subslot | port:timeslot no ip address encapsulation ppp clock source internal xconnect vc-id pw-class pw-class pw-class-name xconnect peer-loopback vc-id pw-class pe-class-name Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 404 T1 controller. Example: Router(config-controller)# linecode b8zs Step 10 Decreases the transmit signal by 0 dB. This is the cablelength long db-loss-value default value. Example: Router(config-controller)# cablelength long 0db Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 405 Removes the previously configured IP address. no ip address Example: Router(config-if)# no ip address Step 22 Configures the PPP (for serial interface) encapsulation ppp encapsulation on serial interface. Example: Router(config-if)# encapsulation frame-relay Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 406: Additional References
MIBs MIBs Link • CISCO-IETF-PW-MIB To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use the Cisco MIB Locator found at the CISCO-IETF-PW-MPLS-MIB • following URL: http://www.cisco.com/go/mibs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 407: Feature Information For Configuring Mpls Layer 2 Vpns
Table 2 lists the features in this module and provides links to specific configuration information. Only features that were introduced or modified in Cisco IOS Release 3.6.0S or a later release appear in the table. Not all commands may be available in your Cisco IOS software release. For release information about a specific command, see the corresponding command reference documentation.
Page 408 Routers. The following sections provide information about this feature: • Gigabit EtherChannel for Virtual Private Wire Service, page 17 Configuring Gigabit EtherChannel for Virtual Private • Wire Service, page 19 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 409: Glossary
IP and MPLS networks. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 410 Configuring MPLS Layer 2 VPNs Glossary Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 411: Tracing And Trace Management
Tracing is a function that logs internal events. Trace files are automatically created and saved to the tracelogs directory on the harddisk: file system on all Cisco ASR 1000 Series Routers except the Cisco ASR 1002 Router, which stores tracing files in bootflash:. Trace files are used to store tracing data.
Page 412: Tracing Levels
Tracing cannot be disabled on the Cisco ASR 1000 Series Router. Trace levels, however, which set the message types that generate trace output, are user-configurable and can be set using the platform trace commands.
Page 413: Viewing A Tracing Level
Viewing a Tracing Level By default, all modules on the Cisco ASR 1000 Series Routers are set to notice. This setting will be maintained unless changed by a user.
Page 414: Setting A Tracing Level
Setting a Tracing Level To set a tracing level for any module on the Cisco ASR 1000 Series Routers, or for all modules within a process on the Cisco ASR 1000 Series Router, enter the platform software trace privileged EXEC and diagnostic mode command.
Page 415: Viewing The Content Of The Trace Buffer
08/23 11:53:57.440 [uipeer]: (info): Going to send a status update to the shell manager in slot 0 08/23 11:53:47.417 [uipeer]: (info): Going to send a status update to the shell manager in slot 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 416 Tracing and Trace Management Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 417: Configuring And Accessing The Web User Interface
Configuring and Accessing the Web User Interface The Cisco ASR 1000 Series Routers introduce a web user interface that expands on the functionality of web user interfaces available in other Cisco routers. This chapter is about this web user interface and covers the following topics: Web User Interface Overview, page 1 •...
Page 418: Legacy Web User Interface Overview
On the Cisco ASR 1000 Series Routers, this interface is part of the larger web user interface and can be accessed by clicking the “IOS Web UI” option in the left-hand menu.
Page 419 Legacy Web User Interface Home Page Graphics-Based Web User Interface Overview The web user interface on the Cisco ASR 1000 Series Routers expands the legacy web user interface available on other platforms by presenting information in easy-to-read graphics-based tables, graphs, or charts, depending on the information presented.
Page 420: Persistent Web User Interface Transport Maps Overview
HTTP, HTTPS, or both protocols. Only one persistent web user interface transport map can be applied to a Cisco ASR 1000 Series Router at a time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 421: Configuring The Router For Web User Interface Access
Access” section on page Configuring the Router for Web User Interface Access The ability to access either web user interface on the Cisco ASR 1000 Series Routers is disabled by default. The legacy web user interface must be configured before the graphics-based web user interface can be enabled.
Page 422 In the following example, the web user interface using the default HTTP and HTTPS ports is enabled: Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# ip http server Router(config)# ip http secure-server Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 423: Authentication And The Web User Interface
. Your previous session has timed-out, or . You have been logged out from elsewhere, or . You have not yet logged in, or . The resource requires a higher privilege level login. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 424: Accessing The Web User Interface
The graphics-based web user interface similar to Figure 6 in the “Graphics-Based Web User Interface Step 4 Overview” section on page 3 should appear in your web browser. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 425: Using Auto Refresh
Configuring and Accessing the Web User Interface Using Auto Refresh For additional information on the commands and the options available with each command, see the Cisco IOS Configuration Fundamentals Command Reference Guide located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html. Using Auto Refresh The web user interface does not refresh content automatically by default.
Page 426: Web User Interface Tips And Tricks
This section provides some useful information about using the web user interface once the interface has been accessed: If you know a Cisco IOS command-line interface command to gather information that you are • unable to gather using the web user interface, you can click IOS Web UI followed by Monitor the Router to enter commands.
Page 427: Unsupported Commands
A P P E N D I X Unsupported Commands The Cisco ASR 1000 Series Routers contain a series of commands with the platform keyword that either produce no output or produce output that is not useful for customer purposes. Although some commands...
Page 428: Appendix A Unsupported Command
• debug platform software shell • debug platform software urpf • debug platform software vty • debug platform software wccp • • debug platform software zone Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 429 • show platform software mpls • show platform software multicast • show platform software nat • show platform software nbar • • show platform software netflow Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 430 • test platform software inject test platform software process • test platform software shell • test platform software tdl • test platform software trace • Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 431: Configuration Examples
This appendix is designed to provide examples of how some common networking tasks can be accomplished on the Cisco ASR 1000 Series Routers. The examples in this appendix are provided for illustrative purposes only; little or no context is given with these examples. See the other chapters in this book (in particular Chapter 3, “Consolidated Packages and SubPackages...
Page 432: Appendix B Configuration Example
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. !!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! File reception completed. Boot image size = 208904396 (0xc73a0cc) bytes Using midplane macaddr Package header rev 0 structure detected Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 433 Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Thu 01-May-08 00:29 by mcpre Image text-base: 0x10064AF0, data-base: 0x137E0958 Cisco IOS-XE software, Copyright (c) 1986-2008 by Cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0.
Page 434 Configuration Examples Configuring the Router to Boot the Consolidated Package on the TFTP Server A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 435: Copying The Consolidated Package From The Tftp Server To The Router
Appendix B Configuration Examples Copying the Consolidated Package from the TFTP Server to the Router A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 436: Configuring The Router To Boot Using The Consolidated Package Stored On The Router
User Access Verification Username: user Password: Router>en Password: Router#show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 437: Extracting The Subpackages From A Consolidated Package Into The Same File System
If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 438 May 22 2008 11:26:28 -07:00 asr1000rp1-sipspa.02.01.00.122-33.XNA.pkg 57603 -rw- 6256 May 22 2008 11:26:28 -07:00 packages.conf -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz 928862208 bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 439: Extracting The Subpackages From A Consolidated Package Into A Different File System
May 7 2008 17:27:51 -07:00 .prst_sync 43970 -rw- 5740 May 27 2008 14:25:00 -07:00 asr1000rp1-packages-adventerprisek9.02.01.00.122-33.XNA.conf 43980 -rw- 20334796 May 27 2008 14:25:01 -07:00 asr1000rp1-rpaccess.02.01.00.122-33.XNA.pkg 43981 -rw- 22294732 May 27 2008 14:25:02 -07:00 asr1000rp1-rpbase.02.01.00.122-33.XNA.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11...
Page 440: Configuring The Router To Boot Using The Subpackages
End with CNTL/Z. Router(config)# boot system bootflash:packages.conf Router(config)# config-reg 0x2102 Router(config)# exit Router# config t *May 29 22:47:57.433: %SYS-5-CONFIG_I: Configured from console by user Router# show running-config | include boot Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-10 OL-16506-11...
Page 441 (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-11 OL-16506-11...
Page 442 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 443 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 444: Backing Up Configuration Files
255497216 bytes total (40190464 bytes free) Router# copy nvram:startup-config usb0: Destination filename [startup-config]? 3172 bytes copied in 0.214 secs (14822 bytes/sec) Router# dir usb0: Directory of usb0:/ Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-14 OL-16506-11...
Page 445: Enabling A Second Ios Process On A Single Rp Using Sso
Manual Swact = disabled (system is simplex (no peer unit)) Communications = Down Reason: Simplex mode client count = 66 client_notification_TMR = 30000 milliseconds RF debug mask = 0x0 SSO is configured: Router# configure terminal Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-15 OL-16506-11...
Page 446 The router needs to be reloaded after saving the running configuration to make SSO the operational redundancy mode: Router# reload Proceed with reload? [confirm] *May 27 19:45:16.917: %SYS-5-RELOAD: Reload requested by user on console. Reload Reason: Reload command. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-16 OL-16506-11...
Page 447 San Jose, California 95134-1706 Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Thu 01-May-08 00:29 by mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-17 OL-16506-11...
Page 448 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 449: Issu—Consolidated Package Upgrade
RF debug mask = 0x0 ISSU—Consolidated Package Upgrade In the following example, ISSU is used to upgrade two RPs in the same Cisco ASR 1000 Series Router to consolidated packages. The RPs are being upgraded from Cisco IOS XE Release 2.1.0, which uses Cisco IOS Release 12.2(33)XNA, to Cisco IOS XE Release 2.1.1, which uses Cisco IOS Release...
Page 450 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 451 Dec 13 2004 03:53:00 -08:00 .ssh -rw- 33554432 Dec 13 2004 03:53:49 -08:00 nvram_00100 -rw- 208904396 Jun 5 2008 20:12:53 -07:00 asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin 58625 drwx 4096 Jul 21 2008 15:32:59 -07:00 .prst_sync Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-21 OL-16506-11...
Page 452 *Jul 21 23:43:31.970: %SYS-5-RESTART: System restarted -- Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-22 OL-16506-11...
Page 453 Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Tue 08-Jul-08 14:40 by mcpre Cisco IOS-XE software, Copyright (c) 1986-2008 by Cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0.
Page 454 Appendix B Configuration Examples ISSU—Consolidated Package Upgrade A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco ASR1006 (RP1) processor with 1772046K/6147K bytes of memory.
Page 455 After the switchover, the user must log onto RP0. The remaining commands are all entered from RP0: Router# issu acceptversion Cancelling rollback timer SUCCESS: Rollback timer cancelled Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-25 OL-16506-11...
Page 456 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 457 921599K bytes of eUSB flash at bootflash:. 39004543K bytes of SATA hard disk at harddisk:. Configuration register is 0x2102 Router# show running-config | include boot boot-start-marker boot system bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin boot system bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin boot-end-marker Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-27 OL-16506-11...
Page 458 Appendix B Configuration Examples ISSU—Consolidated Package Upgrade Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-28 OL-16506-11...
Page 459 TFTP server example Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-I OL-16506-11...
Page 460 ISSU, upgrade procedures forwarding manager process, overview ISSU and software compatibility issu command, command set overview ISSU restrictions ISSU support, release 3.1S global configuration mode, summary of Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-II OL-16506-11...
Page 461 Frame Relay RPAccess, Overview Multilink Frame Relay RPBase, Overview RPControl, Overview RPIOS, Overview RPR, Cisco ASR 1002 or 1004SSO, Cisco ASR 1002 or no virtual-template snmp command 1004 Packet Forwarding scalability platforms, supported configuring the access interface input and output hold...
Page 462 Tab key, command completion web user interface, tricks and tips telnet, configuring persistent telnet web user interface, using auto-refresh telnet, persistent web user interface access, configuring telnet, persistent telnet restrictions Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-IV OL-16506-11...

This manual is also suitable for:

Asr1004 Asr1006

Cisco ASR1002 - ASR 1002 Router Software Configuration Manual

Software Packaging and Architecture

Using Cisco IOS XE Software

Console Port, Telnet, and SSH Handling

Consolidated Packages and Subpackages Management

Software Upgrade Process

High Availability Overview

Broadband Scalability and Performance

Configuring Cisco License Call Home

Configuring Call Home

Configuring Cisco Right-To-Use License

Contents

Using the Management Ethernet Interface

Network Synchronization Support

Quick Links

Troubleshooting

Related Manuals for Cisco ASR1002 - ASR 1002 Router

Summary of Contents for Cisco ASR1002 - ASR 1002 Router