Cisco ASR 14000 Series Management Command Reference page 623

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server notification-log-mib
To configure the NOTIFICATION-LOG-MIB, use the snmp-server notification-log-mib command in
global configuration mode. To remove the specified configuration, use the no form of this command.
Syntax Description
globalAgeOut time
globalSize size
default
disable
size size
Defaults
globalAgeOut time: 15
globalSize size: 500
size size: 500
Command Modes
Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Logging of NOTIFICATION-LOG-MIB notifications begins when the default log is created. Named logs
are not supported, therefore only the default log can be created.
Task ID Task ID
snmp
Examples
The following example creates a default log for notifications:
RP/0/RP0/CPU0:Router(config)# snmp-server notification-log-mib default
The following example removes the default log:
OL-17231-01
snmp-server notification-log-mib {globalAgeOut time | globalSize size | default | disable | size
size}
no snmp-server notification-log-mib {globalAgeOut | globalSize | default | disable | size}
Specifies how much time, in minutes, a notification remains in the log.
Values for minutes can range from 0 to 4294967295.
Specifies the maximum number of notifications that can be logged in all
logs.
Specifies to create a default log.
Specifies to disable logging to the default log.
Specifies the maximum number of notifications that the default log can hold.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server notification-log-mib
SMR-621