Cisco ASR 14000 Series Management Command Reference page 576

slow-migration-interval
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
slow-migration-interval
To set the slow migration interval for the program, use the slow-migration-interval command in
placement program configuration mode. To return the slow migration interval to its default value, use
the no form of this command.
Syntax Description
length
Defaults length: 1 second
Command Modes Placement program configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The placement reoptimize command identifies processes that must be moved to achieve optimal
placement. To prevent disruption on the router, you can use the slow-migration-interval command to
specify the time to wait after moving each process, to allow the router to recover before preceding to
move the next process.
Task ID Task ID
sysmgr
Examples The following example shows how to set the slow migration interval:
RP/0/RP0/CPU0:router(config)# placement program ipv4_rib
RP/0/RP0/CPU0:router(config-place)# slow-migration-interval 240
Related Commands Command
placement program
Cisco ASR 14000 Series Router System Management Command Reference
SMR-574
slow-migration-interval length
no slow-migration-interval
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Enters placement program configuration mode to set process affinities
(preferences).
Process and Memory Management Commands on Cisco IOS XR Software
Length of the slow migration interval in seconds.
OL-17231-01