Cisco ASR 14000 Series Management Command Reference page 710

show sessions
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Table 87
Table 87
Field
Conn
Host
Address
Service
Idle
Conn Name
Related Commands Command
disconnect
resume
Cisco ASR 14000 Series Router System Management Command Reference
SMR-708
describes the significant fields shown in the display.
show sessions Field Descriptions
Description
Identifier for the connection used for resuming and disconnecting suspended
sessions. An asterisk (*) indicates the current terminal session.
Remote host to which the router is connected. This field displays either the
IP address or hostname of the remote host. If the IP address of the remote
host is mapped to hostname (that is, if Domain Name System [DNS] services
are enabled) and the session is initiated with the hostname, the output for this
field displays the hostname of the host rather than the IP address of the host.
IP address of the remote host.
Remote connection service used.
Interval (in seconds) since data was last sent on the line.
Equivalent to the "Host" field in the Cisco IOS XR software.
Description
Disconnects a network connection.
Switches to another active Telnet session.
Terminal Services Commands on Cisco IOS XR Software
OL-17231-01