Cisco ASR 14000 Series Management Command Reference page 136

load configuration removed
load configuration removed
To populate the target configuration with the contents of the previous removed configuration, use the
load configuration removed command in global configuration or administration configuration mode.
Syntax Description
config-id
Command Modes Global configuration
Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the load configuration removed command to populate the target configuration with the contents of
the removed configuration during installation operations.
Task ID Task ID
config-services
Examples The following example shows how to populate the target configuration with the contents of the removed
configuration during installation:
RP/0/RP0/CPU0:router(config)# load configuration removed 20070316021626.cfg
Related Commands Command
show configuration
persistent
Cisco ASR 14000 Series Router System Management Command Reference
SMR-134
load configuration removed config-id
Identifier of the removed configuration to load.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Displays the configuration removed during installation operations.
Configuration Management Commands on Cisco IOS XR Software
OL-17231-01