Cisco ASR 14000 Series Management Command Reference page 698

line
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
line
To specify the console, the default, or a user-defined line template and enter line template configuration
mode, use the line command in global configuration mode.
Syntax Description
console
default
template
template-name
Defaults No default behavior or values
Command Modes
Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the line command to specify a line template type and enter into line template configuration mode.
Line templates are a collection of attributes used to configure and manage physical terminal line
connections (the console and auxiliary ports) and vty connections. The following templates are available
in the Cisco IOS XR software:
•
•
•
Task ID Task ID
tty-access
Examples The following example shows how to enter line template configuration mode to allow configuration
changes to be made to the default line template:
RP/0/RP0/CPU0:router(config)# line default
RP/0/RP0/CPU0:router(config-line)#
Cisco ASR 14000 Series Router System Management Command Reference
SMR-696
line {console | default | template template-name}
Specifies the line template for the console line.
Specifies the default line template.
Specifies a user-defined line template to be applied to a vty pool.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Default line template—The default line template that applies to a physical and virtual terminal lines.
Console line template—The line template that applies to the console line.
User-defined line templates—User-defined line templates that can be applied to a range of virtual
terminal lines.
Operations
read, write
Terminal Services Commands on Cisco IOS XR Software
OL-17231-01