Cisco ASR 14000 Series Management Command Reference page 655

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server traps syslog
To enable Simple Network Management Protocol (SNMP) notifications of Cisco-syslog-MIB error
messages, use the snmp-server traps syslog command in global configuration mode. To disable these
types of notifications, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults SNMP notifications are disabled by default.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The snmp-server traps syslog command is used with the
snmp-server host
Task ID Task ID
snmp
Examples
The following example shows how to enable Cisco-syslog-MIB error message notifications to the host
at the address myhost.cisco.com, using the community string defined as public:
RP/0/RP0/CPU0:Router(config)# snmp-server traps syslog
RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public
Related Commands Command
snmp-server engineid
snmp-server host
snmp-server traps bgp
snmp-server traps snmp
OL-17231-01
snmp-server traps syslog
no snmp-server traps syslog
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
command to specify which host or hosts receive SNMP notifications.
Operations
read, write
Description
Specifies the identification number of the local SNMP engine.
Specifies the recipient of an SNMP notification operation.
Enables BGP server state-change SNMP notifications.
Enables RFC 1157 SNMP notifications.
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server traps syslog
snmp-server host command. Use the
SMR-653