Cisco ASR 14000 Series Management Command Reference page 669

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
access-class
To restrict incoming and outgoing connections using an IPv4 or IPv6 access list, use the access-class
command in line template configuration mode. To remove the access-class command from the
configuration file and restore the system to its default condition, use the no form of this command.
Syntax Description
list-name
in
out
Defaults
No access class is set.
Command Modes
Line template configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the access-class command to restrict incoming or outgoing connections to addresses defined in an
access list. Use the ipv4 access-list or ipv6 access-list command to define an access list by name.
To restrict access of incoming or outgoing connections over IPv4 and IPv6, the IPv4 access list and IPv6
Note
access list must share the same name.
Task ID Task ID
tty-access
Examples
The following example shows how to specify an access class assigned to outgoing connections for the
default line template:
RP/0/RP0/CPU0:router(config)# line default
RP/0/RP0/CPU0:router(config-line)# access-class vtyacl out
OL-17231-01
access-class list-name {in | out}
no access-class list-name {in | out}
IPv4 or IPv6 access list name.
Filters incoming connections.
Filters outgoing connections.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
access-class
SMR-667