Cisco ASR 14000 Series Management Command Reference page 668

absolute-timeout
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
absolute-timeout
To set the absolute timeout for line disconnection, use the absolute-timeout command in line template
configuration mode. To remove the absolute-timeout command from the configuration file and restore
the system to its default condition, use the no form of this command.
Syntax Description
minutes
Defaults minutes: 1440
Command Modes Line template configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the absolute-timeout command to terminate the connection after the specified time has elapsed,
regardless of whether the connection is being used at the time of termination. You can specify an
absolute-timeout value for each port. The user is notified 20 seconds before the session is terminated.
Task ID Task ID
tty-access
Examples
The following example shows how to set the session timeout value to 2880 minutes (2 days) for the
default line template:
RP/0/RP0/CPU0:router(config)# line default
RP/0/RP0/CPU0:router(config-line)# absolute-timeout 2880
Related Commands Command
exec-timeout
session-timeout
Cisco ASR 14000 Series Router System Management Command Reference
SMR-666
absolute-timeout minutes
no absolute-timeout minutes
Absolute timeout interval, in minutes. Range is from 10 to 10000.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Sets the idle wait timeout interval for user input over a physical terminal
connection.
Sets the idle wait timeout interval for user input over a virtual terminal
connection.
Terminal Services Commands on Cisco IOS XR Software
OL-17231-01