Cisco ASR 14000 Series Management Command Reference page 328

xml agent corba
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
xml agent corba
To enable Extensible Markup Language (XML) Common Object Request Broker Architecture (CORBA)
agent services so that you can manage and configure the router using an XML interface, use the xml
agent corba command in global configuration mode. To disable XML agent services, use the no form
of this command.
Syntax Description access-group name (Optional) Enables access to the XML CORBA services from IP addresses that
ssl
Defaults
The XML agent is disabled.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
For the xml agent corba command to work, at least one interface on the router must be up and running.
(Interfaces can be verified by pinging the host.)
SSL-enabled CORBA services can be activated using the xml agent corba ssl command. These same
services can be deactivated using the no xml agent corba command.
Task ID Task ID
config-services
Examples The following example shows how to enable XML CORBA agent services:
RP/0/RP0/CPU0:router# config
RP/0/RP0/CPU0:router(config)# xml agent corba
Cisco ASR 14000 Series Router System Management Command Reference
SMR-326
xml agent corba [ssl] [access-group name]
no xml agent corba
meet the conditions of the access control list (ACL) specified for the name
argument.
(Optional) Enables Secure Socket Layer (SSL) CORBA services.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Manageability Commands on Cisco IOS XR Software
OL-17231-01