Cisco ASR 14000 Series Management Command Reference page 711

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show terminal
To obtain information about the terminal configuration attribute settings for the current terminal line,
use the show terminal command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
tty-access
Examples
The following is sample output from the show terminal command:
RP/0/RP0/CPU0:router# show terminal
Line con0_0_0, Location "Unknown", Type "Unknown"
Length: 0 lines, Width: 0 columns
Baud rate (TX/RX) is 9600/9600, 1 parity, 2 stopbits, 8 databits
Template: console
Config:
Allowed transports are none.
Table 88
Table 88
Field
Line
Location
Type
Length
OL-17231-01
show terminal
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
describes the significant fields shown in the display.
show terminal Field Descriptions
Description
Line that is currently being used.
Not implemented in the Cisco IOS XR software.
Not implemented in the Cisco IOS XR software.
Length of the terminal or screen display, in rows.
Cisco ASR 14000 Series Router System Management Command Reference
show terminal
SMR-709