Cisco ASR 14000 Series Management Command Reference page 707

Router system

Hide thumbs Also See for ASR 14000 Series:

Table of Contents

Terminal Services Commands on Cisco IOS XR Software

C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1

The following is sample output from the show line command with the console line specified:

RP/0/RP0/CPU0:router# show line console location 0/rp0/cpu0

con0/RP0/CPU0

Line con0_RP0_CPU0, Location "0/RP0/CPU0", Type "Console"

Length: 24 lines, Width: 80 columns

Baud rate (TX/RX) is 9600, 1 parity, 2 stopbits, 8 databits

Template: console

Capabilities: Timestamp Disabled

Allowed transports are none.

describes the significant fields shown in the display.

show line Field Descriptions

Available ttys and vtys.

Baud rate that the inbound serial connection is using, in bps.

Not implemented in the Cisco IOS XR software.

Hardware Universal Asynchronous Receiver/Transmitter (UART) overruns

or software buffer overflows, both defined as the number of overruns or

overflows that have occurred on the specified line since the system was

restarted. Hardware overruns are buffer overruns; the UART chip has

received bits from the software faster than it can process them. A software

overflow occurs when the software has received bits from the hardware faster

than it can process them.

Not implemented in the Cisco IOS XR software.

describes the significant fields shown in the display.

show line location Field Descriptions

Unique identifier of the tty; it contains the type of tty and, for physical ttys,

it indicates the physical location of the tty.

Baud rate that the inbound serial connection is using in bps.

Not been implemented on the Cisco IOS XR software.

Cisco ASR 14000 Series Router System Management Command Reference

Table of Contents