Cisco ASR 14000 Series Management Command Reference page 41

Boot Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show variables system
To display internal system environmental variables set on the router, use the show variables system
command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults No defaults behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show variables system command to display system environmental variables for the router.
Task ID Task ID
basic-services
Examples
The following is sample output from the show variables system command. The output is meant to be
interpreted by Cisco personnel.
RP/0/RP0/CPU0:router# show variables system
TERM=vt220
GDB_PDEBUG=-P1
TERM=vt100
DIR_PREFIX=.
LOADPATH=/pkg
LD_LIBRARY_PATH=/pkg/lib
PATH=/pkg/bin
BFM_CONFIG_PATH=/pkg/bfm/config
BGP_PATH=/pkg/bgp
CONFIGS_PATH=/pkg/configs
CRAFT_PATH=/pkg/cwi
CTF_PATH=/pkg/ctf
DM_RULES_PATH=/pkg/dm/rules
ETC_PATH=/pkg/etc
FPD_PATH=/pkg/fpd
IM_RULES_PATH=/pkg/rules
OL-17231-01
show variables system
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Cisco ASR 14000 Series Router System Management Command Reference
show variables system
SMR-37