Cisco ASR 14000 Series Management Command Reference page 700

parity
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
parity
To set the parity bit for physical terminal connections, use the parity command in line console
configuration mode. To specify no parity, use the no form of this command.
Syntax Description
even
none
odd
Defaults
No parity is set.
Command Modes
Line console configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Communication protocols provided by devices such as terminals and modems often require a specific
parity bit setting.
Use the parity command for setting the parity attribute for physical terminal connections. Physical
terminal connections use either the console or auxiliary line template.
Task ID Task ID
tty-access
Examples The following example shows how to set the line parity configuration to even for the console line
template:
RP/0/RP0/CPU0:router(config)# line console
RP/0/RP0/CPU0:router(config-line)# parity even
Related Commands Command
show users
Cisco ASR 14000 Series Router System Management Command Reference
SMR-698
parity {even | none | odd}
no parity {even | none | odd}
Specifies even parity.
Specifies no parity.
Specifies odd parity.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Displays information about the active lines on the networking device.
Terminal Services Commands on Cisco IOS XR Software
OL-17231-01