Cisco ASR 14000 Series Management Command Reference page 276

show dsc
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show dsc
To display the current designated shelf controller (DSC) configuration for the shelf or for the system,
enter the show dsc command in administration EXEC mode.
Syntax Description
all
mine
location node-id
Defaults No default behavior or values
Command Modes Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
For more information about identifying and selecting a DSC on the Cisco ASR 14000 Series Router refer
to Cisco ASR 14000 Getting Started Guide.
Task ID Task ID
system
Examples The following is sample output from the show dsc mine command:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# show dsc mine
NODE
=====================================================================
0/0/CPU0
---------------------------------------------------------------------
Table 27
Cisco ASR 14000 Series Router System Management Command Reference
SMR-274
show dsc [all | mine | location node-id]
(Optional) Displays DSC information from all available nodes in the
system.
(Optional) Displays information about the current node.
(Optional) Displays DSC information for a specific node. The node-id is
expressed in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
ROLE
DSC
describes the significant fields shown in the display.
Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
PRIORITY TBEACON
3 2000
PRESENT MIGRATION
YES ENABLED
OL-17231-01