Cisco ASR 14000 Series Management Command Reference page 514

exception sprsize
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
exception sprsize
To specify the maximum file size for core dumps, use the exception sprsize command in administration
configuration mode or in global configuration mode. To remove the configuration, use the no form of
this command.
Syntax Description
megabytes
Defaults megabytes: 192 MB
Command Modes Administration configuration
Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the exception sprsize command to specify the maximum file size for core dumps. The maximum
file size configured for the megabytes argument is used with the configuration set for the
sparse
are disabled and a core dump file is predicted to exceed the default value (192 MB) uncompressed or the
value specified for the megabytes argument uncompressed, a sparse core dump file is generated. If sparse
core dumps are enabled, a sparse core dump file is generated, regardless of the size of the core dump file.
Task ID Task ID
diag
Examples
The following example shows how to set the file size of sparse core dumps to 300 MB:
RP/0/RP0/CPU0:router(config)# exception sprsize 300
Related Commands Command
exception sparse
Cisco ASR 14000 Series Router System Management Command Reference
SMR-512
exception sprsize megabytes
no exception sprsize
Size in megabytes (MB).
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
command to determine whether or not to generate a sparse core dump file. If sparse core dumps
Operations
read, write
Description
Enables or disables sparse core dumps.
Process and Memory Management Commands on Cisco IOS XR Software
exception
OL-17231-01