Cisco ASR 14000 Series Management Command Reference page 607

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server group
To configure a new Simple Network Management Protocol (SNMP) group, or a table that maps SNMP
users to SNMP views, use the snmp-server group command in global configuration mode. To remove
a specified SNMP group, use the no form of this command.
Syntax Description name
v1
v2c
v3
auth
noauth
priv
read view
write view
notify view
context context-name
access-list-name
Defaults See
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
OL-17231-01
snmp-server group name {v1 | v2c | v3 {auth | noauth | priv}} [read view] [write view] [notify
view] [context context-name] [access-list-name]
no snmp-server group name
Name of the group.
Specifies a group that uses the SNMPv1 security model. The SNMP v1
security model is the least secure of the possible security models.
Specifies a group that uses the SNMPv2c security model. The SNMPv2c
security model is the second least secure of the possible security models.
Specifies a group that uses the SNMPv3 security model. The SNMP v3
security is the most secure of the possible security models.
Specifies authentication of a packet without encrypting it.
Specifies no authentication of a packet.
Specifies authentication of a packet with encryption.
(Optional) Specifies a read view string (not to exceed 64 characters) that is
the name of the view that allows only the contents of the agent to be viewed.
(Optional) Specifies a write view string (not to exceed 64 characters) that is
the name of the view used to enter data and configure the contents of the
agent.
(Optional) Specifies a notify view string (not to exceed 64 characters) that
is the name of the view used to specify a notify or trap.
(Optional) Specifies the SNMP context to associate with this SNMP group
and associated views.
(Optional) Access list string (not to exceed 64 characters) that is the name
of the access list.
Table 79 in the "Usage Guidelines" section.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server group
SMR-605