Cisco ASR 14000 Series Management Command Reference page 472

delay
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
delay
To configure the delay, in seconds, before the track or interface state should be polled for a change in
status, use the delay command in the track configuration mode. To delete the configuration of delay
tracking, use the no form of this command.
Syntax Description
delay up seconds
delay down seconds
Defaults No default behavior or values
Command Modes Track configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The delay command can be used in conjunction with all track types:
•
•
•
When using the no form of the command, the use of the seconds argument is optional.
Task ID Task ID
sysmgr
Examples The following example shows that the tracking process is configured to notify the network administrator
that the interface should be polled for its up state in five second intervals:
RP/0/RP0/CPU0:router# configuration
RP/0/RP0/CPU0:router(config)# track name1
RP/0/RP0/CPU0:router(config-track)# delay up 5
Cisco ASR 14000 Series Router System Management Command Reference
SMR-470
delay {up | down} seconds
no delay {up | down} [seconds]
Sets delay of from 1 to 10 seconds before communication of up status of the
tracked object or list of objects.
Sets delay of from 1 to 10 seconds before communication of down status of
the tracked object or list of objects.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
type line-protocol state
type list boolean
type route reachability
Operations
read, write
Object Tracking Commands in Cisco IOS XR Software
OL-17231-01