Cisco ASR 14000 Series Management Command Reference page 637

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server traps ospf errors
To enable Open Shortest Path First (OSPF) error Simple Network Management Protocol (SNMP)
notifications, use the snmp-server traps errors command in global configuration mode. To disable
OSPF error SNMP notifications, use the no form of this command.
Syntax Description authentication-failure
bad-packet
config-error
virt-authentication-failure
virt-bad-packet
virt-config-error
Defaults
SNMP notifications are disabled by default.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
SNMP notifications can be sent as traps.
For a complete description of OSPF error notifications and additional MIB functions, see the
OSPF-TRAP-MIB in the SNMP Object Navigator, available through cisco.com at
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
The snmp-server traps ospf errors command is used with the
snmp-server host
OL-17231-01
snmp-server traps ospf errors {authentication-failure | bad-packet | config-error |
virt-authentication-failure | virt-bad-packet | virt-config-error}
no snmp-server traps ospf errors {authentication-failure | bad-packet | config-error |
virt-authentication-failure | virt-bad-packet | virt-config-error}
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
command to specify which host or hosts receive SNMP notifications.
Enables SNMP traps for authentication failure errors on
physical interfaces.
Enables SNMP traps for bad packet errors on physical
interfaces.
Enables SNMP traps for configuration errors on physical
interfaces.
Enables SNMP traps for authentication failure errors on virtual
interfaces.
Enables SNMP traps for bad packet errors on virtual interfaces.
Enables SNMP traps for configuration errors on virtual
interfaces.
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server traps ospf errors
snmp-server host command. Use the
SMR-635