Cisco ASR 14000 Series Management Command Reference page 22

mirror verify
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
mirror verify
To verify disk synchronization for disk mirroring on a node, use the mirror verify command in EXEC
or administration EXEC mode.
Syntax Description
location node-id
Defaults If no node is specified, the verification is done on the active RP.
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The mirror verify command verifies the synchronization consistency between the primary and
secondary media devices being used in mirroring. The command verifies that the full contents are
identical between the mirrored devices and reports any inconsistencies found.
Task ID Task ID
root-lr
Examples The following example shows how to verify the disk mirroring on the active RP:
RP/0/RP0/CPU0:router# mirror verify
Mirror Verify Information for 0/0/CPU0.
========================================================
Primary device and secondary device are fully synchronized.
Related Commands Command
mirror
Cisco ASR 14000 Series Router System Management Command Reference
SMR-18
mirror verify [location node-id]
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Specifies the RP node in a multishelf system.
Description
Configures disk mirroring on a node.
Boot Commands on Cisco IOS XR Software
OL-17231-01