Cisco ASR 14000 Series Management Command Reference page 339

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear install rollback oldest
To delete saved installation points from the installation buffer, use the clear install rollback oldest
command in EXEC or administration EXEC mode.
Syntax Description
points
Defaults
No default behavior or values
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the clear install rollback oldest command to delete saved installation points from the installation
buffer.
Command Modes
•
•
Task ID Task ID
pkg-mgmt
Examples In the following example, the command show install rollback ? is used to display the available rollback
points. The command clear install rollback oldest 2 is then used to delete the two oldest rollback
points. The command show install rollback ? is used again to display the remaining rollback points.
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# show install rollback ?
0
2
OL-17231-01
clear install rollback oldest points
Number of saved installation points to delete, beginning with the oldest
saved installation point.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Enter the clear install rollback oldest command in administration EXEC mode to delete the saved
installation points for all secure domain routers (SDRs).
Enter the clear install rollback oldest command in EXEC mode to delete the saved installation
points for the SDR to which you are logged in.
Operations
read, write
ID of the rollback point to show package information for
ID of the rollback point to show package information for
Cisco ASR 14000 Series Router System Management Command Reference
clear install rollback oldest
SMR-337