Cisco ASR 14000 Series Management Command Reference page 65

CDP Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
WS-C6006 Software, Version McpSW: 7.2(2) NmpSW: 7.2(2)
Copyright (c) 1995-2002 by Cisco Systems
advertisement version: 2
VTP Management Domain: 'sys'
Native VLAN: 125
Duplex: full
Table 9
Table 9
Field
Device ID
Entry address(es)
Platform
Capabilities
Interface
Port ID (outgoing port)
Holdtime
Version
advertisement version
VTP Management Domain
Native VLAN
Duplex
Related Commands Command
show cdp
show cdp interface
show cdp neighbors
show cdp traffic
OL-17231-01
describes the significant fields shown in the display.
show cdp entry Field Descriptions
Description
Displays global CDP information, including timer and holdtime
information.
Displays information about the interfaces on which CDP is enabled.
Displays information about neighboring devices discovered by CDP.
Displays traffic information between devices gathered using CDP.
Cisco ASR 14000 Series Router System Management Command Reference
Description
ID code assigned during installation of the router.
Addresses of the platform, selected interface, and
port ID.
Platform name.
Special functions that the platform can perform
(in this case the platform is a trans-bridge switch).
Interface location expressed as
rack/slot/module/port.
Location of the port in use by the interface.
Time (in seconds) for which the device directs the
neighbor to hold a CDP advertisement before
discarding it. This field is controlled by the cdp
holdtime command.
Software version.
Version number of the advertising protocol.
VLAN Trunking Protocol (VTP) domain name of
neighbor device.
VLAN ID.
Duplex setting: half or full.
show cdp entry
SMR-63