Cisco ASR 14000 Series Management Command Reference page 443

NTP Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
ntp clear
To clear all Network Time Protocol (NTP) peers or a specific NTP peer, use the ntp clear command in
EXEC mode.
Syntax Description
peer
*
Defaults No defaults behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
ip-services
Examples
The following example shows how to clear all NTP peers:
RP/0/RP0/CPU0:router# ntp clear *
OL-17231-01
ntp clear {peer | *}
IPv4 address or hostname of the NTP peer to be cleared.
Clears all NTP peers.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
ntp clear
SMR-441