Cisco ASR 14000 Series Management Command Reference page 630

snmp-server traps
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server traps
To enable Simple Network Management Protocol (SNMP) trap notifications, use the snmp-server traps
command in global configuration mode. To disable SNMP notifications, use the no form of this
command.
Syntax Description
notification-type
Cisco ASR 14000 Series Router System Management Command Reference
SMR-628
snmp-server traps [notification-type]
no snmp-server traps [notification-type]
(Optional) Type of notification (trap) to enable or disable. If no type is
specified, all notifications available on the device are enabled or disabled.
The notification type can be one or more of the following keywords:
• bgp—Enables BGP4-MIB and CISCO-BGP4-MIB traps.
config—Controls configuration notifications, as defined in the
•
CISCO-CONFIG-MAN-MIB (enterprise 1.3.6.1.4.1.9.9.43.2). The
notification type is: (1) ciscoConfigManEvent.
• copy-complete—Enables CISCO-CONFIG-COPY-MIB
ccCopyCompletion traps.
• entity—Controls Entity MIB modification notifications. This notification
type is defined in the ENTITY-MIB (enterprise 1.3.6.1.2.1.47.2) as:
(1) entConfigChange.
fabric bundle—Enables SNMP fabric bundle traps.
•
fabric plane—Enables SNMP fabric plane state-change traps.
•
flash insertion—Enable ciscoFlashDeviceInsertedNotif.
•
flash removal—Enable ciscoFlashDeviceRemovedNotif.
•
fru-ctrl—Enables SNMP entity field replaceable unit (FRU) control traps.
•
• hsrp—Enables SNMP HSRP traps.
ipsec tunnel start—Enables SNMP IPSec tunnel start traps.
•
ipsec tunnel stop—Enables SNMP IPSec tunnel stop traps.
•
• isakmp—Enables ISAKMP traps.
l2vpn all—Enables all Layer 2 VPN traps.
•
l2vpn vc-down—Enables Layer 2 VPN VC down traps.
•
l2vpn vc-up—Enables Layer 2 VPN VC up traps.
•
mpls frr all—Enables all MPLS fast reroute MIB traps.
•
mpls frr protected—Enables MPLS fast reroute tunnel protected traps.
•
mpls ldp—Enables SNMP Multiprotocol Label Switching (MPLS) Label
•
Distribution Protocol (LDP) traps.
mpls traffic-eng—Enables SNMP MPLS traffic engineering traps.
•
msdp peer-state-change—Enables SNMP MSDP Peer state change trap.
•
ntp—Enables SNMP Cisco NTP traps.
•
SNMP Server Commands on Cisco IOS XR Software
OL-17231-01