Cisco ASR 14000 Series Management Command Reference page 440

max-associations
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
max-associations
To set the maximum number of Network Time Protocol (NTP) associations, use the max-associations
command in NTP configuration mode. To restore the default setting, use the no form of this command.
Syntax Description
number
Defaults The default setting for the maximum number of NTP associations is 100.
Command Modes NTP configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the max-associations command to specify the maximum number of associations for an NTP server.
Task ID Task ID
ip-services
Examples The following example shows how to set the maximum number of associations to 200:
RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# max-associations 200
Related Commands Command
show ntp associations
Cisco ASR 14000 Series Router System Management Command Reference
SMR-438
max-associations number
no max-associations number
Maximum number of NTP associations. Range is from 0 to 4294967295.
The default is 100.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Displays the status of NTP associations.
NTP Commands on Cisco IOS XR Software
OL-17231-01