Cisco ASR 14000 Series Management Command Reference page 174

show configuration (config)
show configuration (config)
To display information about the current configuration session (target configuration), use the show
configuration command in any configuration mode.
Syntax Description
merge
running
Defaults
When the command show configuration is entered without an argument, the uncommitted changes to
the target configuration are displayed.
Command Modes
Any configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show configuration command to display details on uncommitted configuration changes.
Use the show configuration command with the running keyword to display the running (active)
configuration.
Prior to committing the target configuration, use the show configuration merge command from any
configuration mode to display the result of merging the target configuration with the running
configuration.
Task ID Task ID
basic-services
Examples In this example, the show configuration command displays uncommitted changes made during a
configuration session:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface POS0/3/0/3
RP/0/RP0/CPU0:router(config-if)# description faq
RP/0/RP0/CPU0:router(config-if)# ipv4 address 10.10.11.20 255.0.0.0
RP/0/RP0/CPU0:router(config-if)# show configuration
Cisco ASR 14000 Series Router System Management Command Reference
SMR-172
show configuration [merge] [running]
(Optional) Displays the configuration that occurs if the contents of the
uncommitted changed (target configuration) are committed to the running
configuration.
(Optional) Displays the running (committed) configuration.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Configuration Management Commands on Cisco IOS XR Software
OL-17231-01