Cisco ASR 14000 Series Management Command Reference page 468

clear type list boolean
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear type list boolean
To clear entry of type list boolean as the basis for tracking an object or list of objects, use the clear type
list boolean command in list tracking configuration mode.
Syntax Description
and
or
Defaults No default behavior or values
Command Modes
List tracking configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
sysmgr
Examples The following example shows how to use the clear type list boolean command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# track connection100
RP/0/RP0/CPU0:router(config-track-list)# clear type list boolean and
Cisco ASR 14000 Series Router System Management Command Reference
SMR-466
clear type list boolean {and | or}
Specifies that the list is up if all objects are up, or down if one or more
objects are down. For example, when tracking two interfaces, up means that
both interfaces are up, and down means that either interface is down.
Specifies that the list is up if at least one object is up. For example, when
tracking two interfaces, up means that either interface is up, and down
means that both interfaces are down.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Object Tracking Commands in Cisco IOS XR Software
OL-17231-01