Cisco ASR 14000 Series Management Command Reference page 289

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot brief command to obtain summary diagnostic information about a
device on an interface on the SPA.
Task ID Task ID
root-lr
Examples The following is sample output for the show hw-module subslot brief command:
RP/0/RP0/CPU0:router# show hw-module subslot 0/1/0 brief
Subslot 0/1/0 brief info:
-----------------------
SPA inserted: YES
SPA type:
SPA operational state: READY
SPA cfg admin up: YES
Table 33
Table 32
Field
SPA inserted
SPA type
SPA operational state
SPA cfg admin up
OL-17231-01
Operations
read
4xOC3 POS SPA
describes the significant fields shown in the display.
show hw-module subslot config Field Descriptions
Description
Indicates if a SPA is currently detected in the subslot.
Description of SPA including the technology type, number of ports, height
of SPA (HHSPA—single height, FHSPA—double height), and optics type.
Current state of the SPA module.
Configured state of the SPA: YES—the SPA is not shut down, NO—the
SPA is shut down.
Cisco ASR 14000 Series Router System Management Command Reference
show hw-module subslot brief
SMR-287