Cisco ASR 14000 Series Management Command Reference page 119

Configuration Management Commands on Cisco IOS XR Software
configuration commit auto-save
To enable automatic saving of the running configuration to a specified file on every commit, use the
configuration commit auto-save command in global configuration mode. To disable automatic saving
of the running configuration to a specified file on every commit, use the no form of the command.
Caution Saving the running configuration to a file is CPU intensive.
configuration commit auto-save filename file_path
no configuration commit auto-save
Syntax Description
filename file_path
Command Default No default behavior or values
Command Modes
Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The configuration commit auto-save command configures the system to save the running configuration
to the specified file and location every time a commit command is run. Alternatively, you can save the
configuration on a one-time basis by specifying the save-running keyword when you run the commit
command.
Task ID Task ID
config-services
Examples
The following example shows how to configure the system to save the running configuration to the file
disk0:/usr whenever the commit command is used:
RP/0/RP0/CPU0:router(config)# configuration commit auto-save filename disk0:/usr
OL-17231-01
Specifies the location to which to save the running configuration.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
write
Cisco ASR 14000 Series Router System Management Command Reference
configuration commit auto-save
SMR-117