Cisco ASR 14000 Series Management Command Reference page 583

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show snmp
To display the status of Simple Network Management Protocol (SNMP) communications, use the show
snmp command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show snmp command to show counter information for SNMP operations. It also displays the
chassis ID string defined with the
Task ID Task ID
snmp
Examples The following is sample output from the show snmp command:
RP/0/RP0/CPU0:Router# show snmp
Chassis: 01506199
37 SNMP packets input
78 SNMP packets output
OL-17231-01
show snmp
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
0 Bad SNMP version errors
4 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
24 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
28 Get-next PDUs
0 Set-request PDUs
0 Too big errors (Maximum packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
snmp-server chassis-id
Cisco ASR 14000 Series Router System Management Command Reference
command.
show snmp
SMR-581