Cisco ASR 14000 Series Management Command Reference page 391

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show install boot-options
To display the boot options set for a specified location or for all locations, use the show install
boot-options command in administration EXEC mode or EXEC mode.
Syntax Description
location node-id
all
Defaults
If no location is specified, the show install boot-options command displays boot options for all
locations.
Command Modes Administration EXEC
EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show install boot-options command to display boot options that were set using the install
boot-options command.
Task ID Task ID
pkg-mgmt
Examples
The following example shows how to display the boot options for all locations:
RP/0/RP0/CPU0:router(admin)# show install boot-options
Node
--------------------------------+-------------------
0/1/SP
0/1/CPU0
0/4/SP
0/4/CPU0
0/4/CPU1
0/6/SP
0/6/CPU0
0/RP0/CPU0
0/RP1/CPU0
OL-17231-01
show install boot-options [location node-id | all]
Specifies a node. The node-id argument is expressed in rack/slot/module
notation.
Displays boot options for all locations.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Boot Options
no boot options set.
no boot options set.
no boot options set.
no boot options set.
no boot options set.
no boot options set.
no boot options set.
no boot options set.
no boot options set.
Cisco ASR 14000 Series Router System Management Command Reference
show install boot-options
SMR-389