Cisco ASR 14000 Series Management Command Reference page 649

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server traps pim neighbor-change
To enable Protocol Independent Multicast (PIM) neighbor status down notifications, use the
snmp-server traps pim neighbor-change command in global configuration mode. To disable PIM
neighbor down notifications, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults PIM Simple Network Management Protocol (SNMP) notifications are disabled by default.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the snmp-server traps pim neighbor-change command to send notifications when a PIM neighbor
changes status from up to down on an interface. Use the
host or hosts receive SNMP notifications.
PIM notifications are defined in the CISCO-PIM-MIB.my and PIM-MIB.my files that can be accessed
from the SNMP Object Navigator, available through cisco.com at
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
Task ID Task ID
snmp
Examples The following example shows how to enable the router to send PIM neighbor status down notifications
to the host at the address myhost.cisco.com using the community string defined as public:
RP/0/RP0/CPU0:Router(config)# snmp-server traps pim neighbor-change
RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public
OL-17231-01
snmp-server traps pim neighbor-change
no snmp-server traps pim neighbor-change
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
snmp-server host
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server traps pim neighbor-change
command to specify which
SMR-647