Cisco ASR 14000 Series Management Command Reference page 720

terminal width
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
terminal width
To set the width of the display terminal for the current terminal session, use the terminal width
command in EXEC mode.
Syntax Description
characters
Defaults No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the terminal width command to set the terminal width value for only the current terminal session
and not save it to the running configuration; exiting from the terminal session returns the terminal width
value to the value configured with the
Task ID Task ID
tty-access
Examples The following example shows how to set the terminal width for the current terminal session to
120 characters:
RP/0/RP0/CPU0:router# terminal width 120
Related Commands Command
width (display)
Cisco ASR 14000 Series Router System Management Command Reference
SMR-718
terminal width characters
Number of characters to display on a screen. Range is from 0 to 512.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Sets the width of the display terminal.
Terminal Services Commands on Cisco IOS XR Software
width (display) command.
OL-17231-01