Cisco ASR 14000 Series Management Command Reference page 476

line-protocol track
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
line-protocol track
To associate a specific track with an IPSec or GRE interface object, use the line-protocol track
command in interface configuration mode. To delete the association between the track and the IPSec or
GRE interface object, use the no form of this command.
Syntax Description
object-name
Defaults No default behavior or values
Command Modes Interface configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
sysmgr
Examples
The following example shows how the line-protocol track command is used:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# track PREFIX1
RRP/0/RP0/CPU0:router(config-track)# type route reachability
RP/0/RP0/CPU0:router(config-track-route)# route ipv4 7.0.0.0/24
RP/0/RP0/CPU0:router(config-track-route)# interface service-ipsec 1
RP/0/RP0/CPU0:router(config-if)# vrf 1
RP/0/RP0/CPU0:router(config-if)# ipv4 address 70.0.0.2 255.25.255.0
RP/0/RP0/CPU0:router(config-if)# line-protocol track PREFIX1
Related Commands Command
interface (track)
track
Cisco ASR 14000 Series Router System Management Command Reference
SMR-474
line-protocol track object-name
no line-protocol track object-name
Name of object being tracked.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Indicatdes an interface object type for tracking purposes.
Initiates a tracking process to track the status of an object or list of objects;
enters track configuration mode.
Object Tracking Commands in Cisco IOS XR Software
OL-17231-01