Cisco ASR 14000 Series Management Command Reference page 71

CDP Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Device ID: uut-user
SysName : uut-user
Entry address(es):
IPv4 address: 1.1.1.1
IPv6 address: 1::1
IPv6 address: 2::2
Platform: cisco 12008/GRP, Capabilities: Router
Interface: POS0/4/0/3
Port ID (outgoing port): POS0/2/0/3
Holdtime : 177 sec
Version :
Cisco IOS XR Software, Version 0.0.0[Default]
Copyright (c) 2005 by cisco Systems, Inc.
advertisement version: 2
Table 12
Table 12
Field
Device ID
Entry address(es)
Platform
Capabilities
Interface
Port ID
Holdtime
Version
advertisement version
Related Commands Command
show cdp
show cdp entry
show cdp interface
show cdp traffic
OL-17231-01
describes the significant fields shown in the display.
show cdp neighbors detail Field Descriptions
Description
Displays global CDP information, including timer and holdtime
information.
Displays information about a specific neighboring device or all neighboring
devices discovered using CDP.
Displays information about the interfaces on which CDP is enabled.
Displays traffic information between devices gathered using CDP.
Cisco ASR 14000 Series Router System Management Command Reference
Definition
Name of the neighbor device.
List of network addresses of neighbor devices. The address
can be in IP, or Connectionless Network Service
protocol conventions.
Product name and number of the neighbor device.
Device type of the neighbor. This device can be a router, a
bridge, a transparent bridge, a source-routing bridge, a
switch, a host, an IGMP device, or a repeater.
Interface being used by the connectivity medium.
Port number of the port on the current device.
Remaining time (in seconds) for which the current device
holds the CDP advertisement from a sending router before
discarding it.
Software version of the neighbor device.
Version number of the advertising protocol.
show cdp neighbors
C LNS)
(
SMR-69