Cisco ASR 14000 Series Management Command Reference page 639

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server traps ospf lsa
To enable Open Shortest Path First (OSPF) link-state advertisement Simple Network Management
Protocol (SNMP) notifications, use the snmp-server traps ospf lsa command in global configuration
mode. To disable OSPF link state SNMP notifications, use the no form of this command.
Syntax Description
lsa-maxage
lsa-originate
Defaults SNMP notifications are disabled by default.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
SNMP notifications can be sent as traps.
For a complete description of OSPF link-state advertisement notifications and additional MIB functions,
see the OSPF-TRAP-MIB in the SNMP Object Navigator, available through cisco.com at
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
The snmp-server traps ospf lsa command is used with the
snmp-server host
Task ID Task ID
snmp
Examples The following example shows how to enable the router to send OSPF link-state advertisement
notifications to the host at the address myhost.cisco.com using the community string defined as public:
RP/0/RP0/CPU0:Router(config)# snmp-server traps ospf lsa lsa-maxage
RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public
OL-17231-01
snmp-server traps ospf lsa {lsa-maxage | lsa-originate}
no snmp-server traps ospf lsa {lsa-maxage | lsa-originate}
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
command to specify which host or hosts receive SNMP notifications.
Operations
read, write
Enables SNMP traps for link-state advertisement maxage.
Enables SNMP traps for new link-state advertisement
origination.
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server traps ospf lsa
snmp-server host command. Use the
SMR-637