Cisco ASR 14000 Series Management Command Reference page 183

Configuration Management Commands on Cisco IOS XR Software
show configuration failed (config)
To display information about a configuration that failed during the last commit, use the show
configuration failed command in any configuration mode.
Syntax Description
load
noerrors
Defaults
Displays the details of the failed configuration including error reasons.
Command Modes Any configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
basic-services
Examples The following example shows a failed commit operation:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# taskgroup bgp
RP/0/RP0/CPU0:router(config-tg)# description this is an example of an invalid task
group
RP/0/RP0/CPU0:router(config-tg)# commit
% Failed to commit one or more configuration items. Please use 'show configuration failed'
to view the errors
The following is sample output from the show configuration command with the optional failed
keyword. The output displays the configuration items that failed during the last commit operation.
RP/0/RP0/CPU0:router(config-tg)# show configuration failed
!! CONFIGURATION FAILED DUE TO SEMANTIC ERRORS
taskgroup bgp
!!% Usergroup/Taskgroup names cannot be taskid names
!
OL-17231-01
show configuration failed [load | noerrors]
(Optional) Displays any syntax errors found in a configuration loaded with
the load
(Optional) Displays the configuration that failed in last commit without the
error reasons.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
command.
Cisco ASR 14000 Series Router System Management Command Reference
show configuration failed (config)
SMR-181