Cisco ASR 14000 Series Management Command Reference page 307

Router system

Hide thumbs Also See for ASR 14000 Series:

Table of Contents

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software

C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1

To display LED information for the router, or for a specific LED location, use the show led location

command in EXEC or administration EXEC mode.

Syntax Description

location {node-id | all}

The default is to enter the show led command without including any optional parameters to display

information about all LEDs on the router.

Command Modes

Administration EXEC

Command History

Release 3.7.1

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper

The following is sample output from the show led location command with the all keyword:

RP/0/RP0/CPU0:router# show led location all

show led [location {node-id | all}]

(Optional) Displays LED information for a single LED location or for

the entire router.

Enter the all keyword to display LED information for the entire router,

or use the node-id argument to specify LED location. The node-id

argument is expressed in the rack/slot/module notation.

Modification

This command was introduced on the Cisco ASR 14000 Series Router.

==================================================

Enter the show platform command to see the location of all

nodes installed in the router.

Cisco ASR 14000 Series Router System Management Command Reference

Table of Contents