Cisco ASR 14000 Series Management Command Reference page 113

Configuration Management Commands on Cisco IOS XR Software
clear configuration sessions
To clear (end) an active configuration session, use the clear configuration sessions command in EXEC
or administration EXEC mode.
Syntax Description
session-id
Defaults No default behavior or values
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the clear configuration sessions command to clear a configuration session. This command can be
used to end the configuration sessions of another user. Any uncommitted changes to a user's target
configuration are discarded.
Use the
When a configuration session is cleared, a message is displayed on the terminal of the terminated user.
For example:
Task ID Task ID
config-services
Examples The following example shows how to clear an active configuration session. In this example, the show
configuration sessions command displays the active configuration session. The clear configuration
sessions command clears the active configuration session.
RP/0/RP0/CPU0:router# show configuration sessions
Session
00000211-002c409b-00000000
OL-17231-01
clear configuration sessions session-id
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
show configuration sessions
RP/0/RP0/CPU0:router(config)# This configuration session was terminated by user
'user_a' from line 'aux0_0_CPU0'
Operations
execute
Identifier for the configuration session to be terminated.
command to identify active configuration sessions.
Line User
con0_RP1_CPU0 UNKNOWN
Cisco ASR 14000 Series Router System Management Command Reference
clear configuration sessions
Date
Mon Feb 2 01:02:09 2004
Lock
SMR-111