Cisco ASR 14000 Series Management Command Reference page 465

Object Tracking Commands in Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear object
To clear entry of a particular object to be used for object for tracking, use the clear object command in
list tracking configuration mode.
Syntax Description
object-name
not
Defaults
No default behavior or values
Command Modes List tracking configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The clear object command is accessed through list tracking configuration submode.
Task ID Task ID
sysmgr
Examples
The following example shows the use of the clear object command:
RP/0/RP0/CPU0:router# configuration
RP/0/RP0/CPU0:router(config)# track name1
RP/0/RP0/CPU0:router(config-track)# type list boolean and
RP/0/RP0/CPU0:router(config-track-list)# clear object IPSEC3 not
Related Commands Command
object
track
type list boolean
OL-17231-01
clear object object-name [not]
Name of the object to be tracked.
Deletes tracking configured on the basis of whether an interface object is
not up or down.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Configures an object to be tracked.
Initiates or identifies a tracking process to track the status of an object; also
enters track configuration mode.
Configures tracking of a list of objects based on a Boolean calculation.
Cisco ASR 14000 Series Router System Management Command Reference
clear object
SMR-463