Cisco ASR 14000 Series Management Command Reference page 278

show environment
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show environment
To display environmental monitor parameters for the system, use the show environment command in
EXEC mode or administration EXEC mode.
In EXEC mode:
In administration EXEC mode:
Syntax Description all
last
fans
leds
table
temperatures
power-supply
trace
voltages
node-id
Defaults
All environmental monitor parameters are displayed.
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The show environment command displays information about the hardware that is installed in the
system, including fans, LEDs, power supply voltage, and current information and temperatures.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-276
show environment [all | last | leds | table | temperatures | voltages] [node-id]
show environment [all | fans | last | leds | power-supply | table | temperatures | trace | voltages]
[node-id]
(Optional) Displays information for all environmental monitor parameters.
(Optional) Displays information for prior environmental monitor
parameters.
(Optional) Displays information about the fans.
(Optional) Displays monitor parameters for LEDs on all cards in the node.
(Optional) Displays environmental parameter ranges.
(Optional) Displays system temperature information.
(Optional) Displays power supply voltage and current information.
(Optional) Displays trace data for environment monitoring.
(Optional) Displays system voltage information.
(Optional) Identifies the node whose information you want to display. The
node-id argument is expressed in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
OL-17231-01