Cisco ASR 14000 Series Management Command Reference page 471

Object Tracking Commands in Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear vrf (track)
To clear entry of a VRF table as a basis to track route reachability, use the clear vrf command in route
tracking configuration mode.
Syntax Description
vrf-table-name
Defaults No default behavior or values
Command Modes Route tracking configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The clear vrf command is accessed through route tracking configuration submode.
Task ID Task ID
sysmgr
Examples
The following example shows the use of the clear vrf command:
RP/0/RP0/CPU0:router# configuration
RP/0/RP0/CPU0:router(config)# track name1
RP/0/RP0/CPU0:router(config-track)# type route reachability
RP/0/RP0/CPU0:router(config-track)# clear vrf vrf-table-name
Related Commands Command
track
type route reachability
vrf (track)
OL-17231-01
clear vrf {vrf-table-name}
Name of the VRF table used for route reachability tracking.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Initiates or identifies a tracking process to track the status of an object; also
enters track configuration mode.
Configures tracking based on whether or not a route is part of a particular
routing table.
Configures that a VRF table should be used as the basis to track route
reachability.
Cisco ASR 14000 Series Router System Management Command Reference
clear vrf (track)
SMR-469