Cisco ASR 14000 Series Management Command Reference page 684

clear line
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear line
To clear an auxiliary or console line to an idle state, use the clear line location command in EXEC mode.
Syntax Description node-id
aux
console
Defaults No default behavior or values
Command Modes
EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
tty-access
Examples The following example shows how to clear the console line, putting it in an idle state:
RP/0/RP0/CPU0:router# clear line console location 0/RP1/CPU0
Related Commands Command
show users
Cisco ASR 14000 Series Router System Management Command Reference
SMR-682
clear line {aux | console} location node-id
Node ID, entered in the rack/slot/module notation. The location refers to a
route processor (RP) where the auxiliary or console line to be cleared
resides.
Clears the auxiliary line.
Clears the console line.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
execute
Description
Displays information about the active lines on the networking device.
Terminal Services Commands on Cisco IOS XR Software
OL-17231-01