Cisco ASR 14000 Series Management Command Reference page 60

clear cdp table
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear cdp table
To clear and automatically resize the table that contains Cisco Discovery Protocol (CDP) information
about neighbors, use the clear cdp table command in EXEC mode.
Syntax Description
location node-id
Defaults
No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the clear cdp table command to clear and resize the CDP table that contains the neighbor entries.
The new table size is calculated according to the recommended hash table size, as seen in the show cdp
command output.
Task ID Task ID
cdp
Examples The following example shows how to clears and resize the CDP table. The output of the
neighbors
has been deleted from the table:
RP/0/RP0/CPU0:router# show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
Device ID
TBA04341195(15la Mg0/RP1/CPU0/0
RP/0/RP0/CPU0:router# clear cdp table
RP/0/RP0/CPU0:router# show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
Cisco ASR 14000 Series Router System Management Command Reference
SMR-58
clear cdp table location node-id
Clears and resizes the CDP table for the designated node. The node-id
argument is entered in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
command before and after use of the clear cdp table command shows that all information
S - Switch, H - Host, I - IGMP, r - Repeater
Local Intrfce
S - Switch, H - Host, I - IGMP, r - Repeater
Holdtme Capability
171 T S
CDP Commands on Cisco IOS XR Software
show cdp
Platform Port ID
WS-C2924 0/1
OL-17231-01