Cisco ASR 14000 Series Management Command Reference page 359

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
install boot-options
To set boot options for a specified node, use the install boot-options command. Boot options include
formatting and cleaning the disk in the specified node during the boot process.
Syntax Description
clean
format
location node-id
Defaults No default behavior or values
Command Modes
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the install boot-options command to clean or format a card during the next reboot. This command
affects only the next reboot that a user initiates. To initiate a reboot during which the boot option you set
will be applied, reboot the card from a disk in another node. You can use the hw-module location reload
command with the path argument to download a boot image using TFTP from a remote node. When the
reboot is complete, the boot options are reset.
Task ID Task ID
pkg-mgmt
Examples The following example shows how to set the card located in node 0/0/CPU0 to be cleaned during the
next reboot:
RP/0/RP0/CPU0:router(admin)# install boot-options clean location 0/0/CPU0
Install operation 7 '(admin) install boot-options clean location 0/0/CPU0'
started by user '' via CLI at 09:15:46 GMT Mon Mar 10 2008.
Info:
Info:
Install operation 7 completed successfully at 09:15:46 GMT Mon Mar 10 2008.
OL-17231-01
install boot-options {clean | format} location node
Cleans the card installed in the specified node during the next reboot.
Formats the card installed in the specified node during the next reboot.
Specifies a node. The node-id argument is expressed in rack/slot/module
notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
The boot option will be in effect when the node is reloaded and will
be cleared when the node preparation is complete.
Cisco ASR 14000 Series Router System Management Command Reference
install boot-options
SMR-357