Cisco ASR 14000 Series Management Command Reference page 374

install rollback to
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
install rollback to
To roll back the software set to a saved installation point or to the last committed installation point, use
the install rollback to command in EXEC or administration EXEC mode.
Administration EXEC Mode
EXEC Mode
Syntax Description point-id
label
committed
auto-abort-timer time
sdr OWNER
admin-profile
asynchronous
synchronous
parallel-reload
prompt-level {default |
none}
test
Defaults The operation is performed in asynchronous mode. The install rollback to command runs in the
background, and the EXEC prompt is returned as soon as possible.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-372
install rollback to {point-id | label | committed} [auto-abort-timer time] [sdr OWNER]
[admin-profile] [asynchronous | synchronous] [parallel-reload] [prompt-level {default |
none}] [test]
install rollback to {point-id | label | committed} [auto-abort-timer time] [asynchronous |
synchronous] [parallel-reload] [prompt-level {default | none}] [test]
Installation point ID number.
Label associated with an installation point.
Rolls the Cisco IOS XR software back to the last committed installation
point.
(Optional) Specifies an abort timer value, time, in minutes, which when
expired loads the last committed loadpath.
(Optional) Rolls back the software set for a specific secure domain
router (SDR). The only SDR available is OWNER, which refers to the
entire Cisco ASR 14000 Series Router router.
(Optional) Rolls back the active software set on the admin profile only.
This option is in administration EXEC mode only.
(Optional) Performs the command in asynchronous mode. In
asynchronous mode, this command runs in the background, and the
EXEC prompt is returned as soon as possible. This is the default mode.
(Optional) Performs the command in synchronous mode. This mode
allows the installation process to finish before the prompt is returned.
(Optional) Forces all cards on the router to reload at the same time and
then come up with the new software, rather than proceeding according
to the option encoded in the install package.
(Optional) Specifies when you are prompted for input during the
procedure.
(Optional) Verifies the effects of proposed operations without making
changes to the Cisco IOS XR software.
Software Package Management Commands on Cisco IOS XR Software
default—You are prompted only when input is required by the
•
operation.
none—You are never prompted.
•
OL-17231-01