Cisco ASR 14000 Series Management Command Reference page 298

show hw-module subslot plim-subblock
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show hw-module subslot plim-subblock
To display SPA firmware information for a shared port adapter
plim-subblock command in EXEC mode.
Syntax Description
node-id
Defaults
No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show hw-module subslot plim-subblock command to display SPA firmware information, both
kernel and application information, as well as heartbeat and keepalive information. The show
hw-module subslot plim-subblock command is mainly used for debugging purposes.
Task ID Task ID
root-lr
Examples The following example shows sample output for the show hw-module subslot plim-subblock
command:
RP/0/RP0/CPU0:router# show hw-module subslot 0/5/0 plim-subblock
Subslot 0/5/0 Plim Subblock Info:
-------------------------------------
Firmware information:
SPA v4.10.1, ifs-spa_ppc_iox.elf
Application v3.44.0, spa_ct3_pat_apps_iox.tar.gz
SPA keepalive information:
Heartbeat check disabled : FALSE
Keepalive seq 372638, seen 372637, Time since last ipc keep 1s
Cisco ASR 14000 Series Router System Management Command Reference
SMR-296
show hw-module subslot [node-id] plim-subblock
(Optional) Location for which to display the specified information. The
node-id argument is entered in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
S PA), use the show hw-module subslot
(
OL-17231-01